Instructions / Assembly

EZ-MAX Plus Installation Guide Page 27
LOW VOLTAGE
General Requirements for Connecting any Device to Low Voltage
Inputs
Step 1: Connect leads per wiring diagram as illustrated in the figures on the
following pages.
Step 2: Twist strands of each lead tightly (making sure that there are no stray
strands) and push firmly into appropriate plug connector location.
Step 3: Tighten the screws on the plug connector—making sure that no bare
conductor is showing.
Step 4: Plug the connector back onto the control module with the screws facing
the front and the wires coming out of the connector toward the top of
the cabinet.