Instructions / Assembly

Read this Before You Begin! Warnings!
Page 2
 Use this relay cabinet only with minimum 75
o
C copper wire at 75%
ampacity.
 Disconnect power when servicing the relay cabinet, fixture or when
changing lamps.
 Indoor use only.
 TO AVOID FIRE, SHOCK OR DEATH: TURN OFF POWER AT MAIN
CIRCUIT BREAKER, OR FUSE, AND TEST THAT THE POWER IS OFF
BEFORE WIRING, OPENING THE PANEL, OR REPLACING ANY
COMPONENT!
 During operation, cabinet cover is to be removed by qualified
personnel ONLY! Heed all caution markings indicating the presence
of High Voltage. High voltage may be up to 600V.
 Test each circuit for short circuits before connecting it to relay so
damage to the relay and it’s electronics can be avoided.
 Verify that all un-used power supply leads are insulated with wire
nuts.