Instructions / Assembly

EZ-MAX Plus Installation Guide Page 3
Overview
Introduction
Thank you for choosing Leviton’s EZ-MAX Plus line of products for your relay needs.
The EZ-MAX Plus product line offers a scalable solution of relay and relay controls that
can fit any application with 2 or 3-circuit needs with time clock control.
This manual is designed to assist you in the installation of your product. It includes
guidelines, requirements, and instructions that are required only for the installation
and low voltage termination of your product. The following resources are also
available to you:
• Quick Start Programming Guide (included with every panel)
• Programming Guide (included with every panel)
• Additional resources located at our website at http://www.leviton.com/lms
A hard copy of the Programming Guide is included with your system purchase. Please
contact Leviton Technical Support at [phone] to request additional copies.
This manual covers all products in the EZ-MAX Plus product line, however, the steps
shown are somewhat generic in nature. The particular requirements for your product,
especially as related to termination, may differ slightly from the steps in this manual.
Please review all markings and labels on your product to ensure that your actions are
correct.
Leviton recommends always checking our website
at http://www.leviton.com/lms for late breaking
notes, requirements, application information, and
firmware updates.