Specification

Features and Benefits
General
- Use of TEST and RESET buttons is similar to traditional
GFCI receptacles of which consumers have become
familiar with. This translates into greater acceptance
of the technology and a more user-friendly platform
- Meets or exceeds UL requirements for tripping time
on both series and parallel arcs
- Device design reduces nuisance tripping
- Impact-resistant thermoplastic cover and body
- Superior resistance to electrical surges and over-voltages
- Expanded wiring options with nine back-wire holes
(two for each line and load connection plus one for ground
with an internal clamp)
- Silver alloy contacts
- Compatible with all Decora
®
devices and wallplates;
available in select colors
- Packed with coordinating wallplate
- Backed by Leviton’s Limited Two-Year Product Warranty
Tamper-Resistant
- TR symbol indicates the device’s compliance with the
latest NEC
®
requirements for tamper-resistant receptacles
in residences and childcare facilities
Lockout Action
- Automatically tests the AFCI every time the RESET
button is depressed; the AFCI will not reset if the AFCI
circuit is not functioning properly
- By blocking reset of the AFCI if protection has been
compromised, the SmartlockPro OBC AFCI reduces the
possibility of end-users incorrectly assuming that a reset
AFCI is providing protection when its functionality has
been compromised
- A line-load reversal diagnostic feature is provided which
prevents the AFCI from being reset and stops power from
being fed to the AFCI receptacle face or through to down-
stream devices; a green LED indicator on the AFCI’s face
also illuminates to alert the installer to a line-load wiring
reversal when the device is in the tripped state
- The trip latching mechanism in the SmartlockPro OBC
AFCI is a one-piece “T” design for efficient operation
- There are 4 sets of contacts for load terminals and face;
the SmartlockPro OBC AFCI uses a patented bifurcated
bridge contact for efficient operation
Key Specifications
- Amperage: 15 Amp/20 Amp
- Voltage: 125 Volt
- Feed-through: 20 Amp protection
- NEMA: 5-15R
- Pole: 2
- Wire: 3
- Indicators: Reverse wiring/power
- Termination: Back & Side
- Grounding: Self-Grounding
- Strap Material: Galvanized Steel
- Standards and Certifications: UL/CSA
- Warranty: 2-Year Limited
Specification Details
AC Horsepower
Ratings
Electrical
Specifications
Environmental
Specifications
Material
Specifications
Mechanical
Specifications
Standards and
Certifications
At Rated
Voltage:
1 HP
Dielectric
Voltage:
Withstands
2000V per UL498
Temperature Rise:
Max 30°C after
100 cycles OL at
150 percent rated
current
Flammability:
Rated V-2 per UL94
Operating
Temperature:
-35°C to +66°C
Face Material:
Thermoplastic
Body Material:
Polycarbonate
Line Contacts:
Brass Double-Wipe
.031 Thick
Terminal Screws:
Plated Steel
Self-Ground Clip
Grounding Screw:
Plated Steel
Yoke:
Zinc-Plated Steel
Clamps:
Brass
Terminal ID:
Brass-Hot,
Green-Ground,
Silver-Neutral
Terminal:
14-10 AWG
Product ID:
Ratings are
permanently
marked on device
Wiring:
Use with copper or
copper-clad wire.
No aluminum wiring
NEMA:
WD-6
ANSI:
C-73
UL498
NOM:
057
UL1699A:
File E342815
UL Fed Spec WC-596
CSA Standard
C22.2 No 42
CSA Technical
Information
Letter No. M-02A