Cut Sheet

COMPONENT SPECIFICATIONS
XXHCR-HCX
Fiber Raceway Horizontal Crosses
XXHCR-HCX
APPLICATION
Horizontal Crosses provide an intersection in the ducting
system and enable the ber path to be routed in various
directions.
SPECIFICATION
Horizontal Crosses shall provide an intersection in the
ducting system, enabling the ber path to be routed in
multiple directions. Horizontal crosses shall protect ber
and help maintain proper bend radius. Components shall
be UL listed and manufactured of re retardant materials.
FEATURES
• Available in four sizes
• 2" x 2"
• 4" x 4"
• 4" x 8"
• 4" x 12"
• Extends the duct route in various directions
• Channels are curved to maintain bend radius control as ber
is redirected
• Available with or without covers
• Available in yellow, orange, black, and grey
DESIGN CONSIDERATIONS
• Manufactured of a re retardant plastic that is halogen free
and low smoke
• May be utilized to store and route copper cable in an indoor
environment. It is recommended that ber and copper be stored in
separate systems
• The 4" x 12" component does not contain end slots and should be
used in conjunction with the Slotless Joiner
STANDARDS COMPLIANCE
UL 94V-0 Material Rating for Flammability
Meets NEBS GR-63-CORE*
UL 2024A Optical Fiber Raceway, Riser Rated
PHYSICAL SPECIFICATIONS
Dimensions: See page two
Materials: Noryl Plastic
Color: See page two
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit www.leviton.com.
Leviton Network Solutions, a division of Leviton Mfg. Co., Inc.
2222 - 222nd St. SE Bothell, WA 98021 Tech Support: 1.800.722.2082 or 1.425.486.2222 Fax: [phone] www.leviton.com
Copyright © 2009 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Page 1 of 2
*Testing conducted by an accredited third party