Cut Sheet

Component
Specifications
3880-DIN
Fiber Raceway Horizontal and Vertical Elbows
Fiber Raceway Horizontal and Vertical Elbows
Part Numbers
SXVEL-XXX, SXHEL-XXX,
SXJNR-SLX
2222 – 222nd St. SE • Bothell, WA 98021 USA
Tel: [phone] • Fax: [phone] • Int'l Fax: [phone] • GSA Schedule Available.
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005.
Spec sheets and updates are also available at www.leviton.com.
DESIGN CONSIDERATIONS
• Redirects ducting while maintaining proper bend radius control.
• Manufactured of a fire retardant plastic that is halogen free.
• May be utilized to store and route copper cable in an indoor
environment. It is recommended that fiber and copper be
stored in separate systems.
• The 4" x 12" component does not contain end slots and
should be used in conjunction with the Slotless Joiner.
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit www.leviton.com.
TYPICAL SPECIFICATION
Horizontal and Vertical Elbows shall be used to divert the raceway
path around objects or extend the fiber route in various directions.
Horizontal and Vertical Elbows shall protect fiber and help maintain
proper bend radius. Components shall be UL rated and manufactured
of fire retardant materials. Horizontal and Vertical Elbows shall
facilitate multiple network configurations and be expandable to
support future configurations.
ELECTRONIC FILES
For CAD files, Typical Specs, or Dimensional Line Art (.DXF, .DWG,
MS-DOS.eps or .TXT), visit www.leviton.com.
APPLICATION
Fiber Raceway Horizontal and Vertical Elbows provide a method
of diverting the raceway path around objects or extend the fiber
route in various directions.
FEATURES
• Elbows are available in five sizes
• 2" x 2"
• 2" x 4"
• 4" x 4"
• 4" x 8"
• 4" x 12"
• Provide bend options at 30˚, 45˚ or 90˚ angles.
• Available with or without covers.
• Horizontal Elbows:
• Extend the duct path in various directions.
• 4" x 8" size has channel separation to organize large
quantities of fibers while maintaining bend radius control.
• Vertical Elbows:
• Retrofit Covers available to allow for easy addition
of new fibers.
• Can be used as a drop point when attached
to the open end of ducting.
• Routes the direction of the fiber path either up or down.
STANDARDS COMPLIANCE
UL 94 V-0 Material Rating for Flammability
Meets NEBS GR-63-CORE*
UL 2024A Optical Fiber Raceway, Riser Rated
PHYSICAL SPECIFICATIONS
Color: See page two
Material: Noryl Plastic
Dimensions: See page two
*Testing conducted by an accredited third party