Specification

Leviton Manufacturing Co., Inc. Global Headquarters
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: [phone]
Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation.
4330 Michoud Blvd., New Orleans, LA, 70129 Tel: [phone] Fax: [phone]
Visit our Website at: www.leviton.com/emca
©2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
SGC65 In-Ceiling Speakers
Spec-Grade
®
PRODUCT DATA
SGC65 In-Ceiling Speakers Powered by Spec-Grade
®
When the specs call for quality sound, rely on Leviton’s
award-winning* Spec-Grade Sound™ indoor and outdoor
speaker line for exceptional technical innovation and
value. Spec-Grade Sound speakers deliver features and
performance comparable to higher-end brands, at a
price that’s right for the entire range of the residential
installation and construction business.
All of Leviton Spec-Grade Sound™ indoor speakers
incorporate exceptionally strong, light and rigid
AeroNylon tweeters and Kevlar®-composite woofers
for exceptional clarity, detail and impact, along with
built-in AutoSurge™ protection to help protect the
speakers from possible damage due to over driving.
The outdoor/utility speaker is constructed of weather
resistant materials inside and out for years of use in
challenging environments.
*Electronic House Magazine “Product of the Year”
APPLICATIONS
In-Ceiling Speakers
The reality of installed audio systems in residences is
that aesthetics are often the main concern with many
homeowners, especially in production building where
the type and location of room furnishings may not be
completely known until after the system is installed.
In these cases a quality, optimized in-ceiling design can
deliver performance comparable to that of in-wall
speakers.
FEATURES AND BENEFITS
In-Ceiling Models)
• Kevlar® composite woofer – Woofer construction
combines exceptional rigidity and lightness to provide
the perfect linear movement needed to reproduce
dynamic, tight bass and incisive midrange frequencies
• AeroNylon tweeter diaphragm – Aerospace-grade
nylon tweeter diaphragm combines very low mass and
high tensile strength to provide crystal-clear treble
response and exceptionally accurate tracking of even
the most challenging musical transients
• AutoSurge™ circuit protection – Built-in AutoSurge
protection responds to potentially destructive power
peaks automatically and resets after the event,
helping prevent speaker damage
• Advanced phase/time alignment guide –
A precise phase/time waveguide is used to properly
align sound without mis-aligning the tweeters – a
problem with many adjustable in-wall speakers – in
order to provide extremely accurate stereo imaging
• Precision dividing network – The dividing network (or
crossover) used in all Spec-Grade Sound speakers is
made of high-spec components to ensure total audio
signal electronic integrity up to the last microsecond
before the signal is converted into sound
• Inert mounting frame with “dogleg” installation
• points – To eliminate any transmitted vibrations that
could color in-wall or ceiling sound quality, Spec-Grade
Sound speakers rely on a bae-frame assembly
incorporating higher-density plastics and a series of
adjustable “doglegs” to rigidly clamp the speaker to
the wall or ceiling material
• 6.5- Inch Two-Way In-Ceiling Loudspeaker
(Cat. No. SGC65-00W)
• Includes paintable white grille
• 6.5-inch Kevlar composite cone low-frequency
transducer
• .5-inch AeroNylon dome high-frequency transducer
• 2-way balanced precision crossover network with
AutoSurge circuit protection
• Frequency Response: 50-20kHz +/- 3dB
• Sensitivity: 87.0 dB SPL @ 1Watt/1 Meter
• Power Handling: 120W peak/60W RMS Impedance:
Nominal 8 Ohms/Minimum 6 Ohms
• Physical Dimensions and Weight: Diameter: 9.03
in/229.4 mm; Depth: 3.25 in/82.6 mm Weight: 6.5 lbs