Cut Sheet

E/7 #2135A
© 2007 Leviton Manufacturing Co., Inc. All Rights Reserved
Fiber Raceway Solid and
Slotted Ducting
Part Number
SXDCT-XXX
2222 – 222nd St. SE • Bothell, WA 98021 USA • Tel: [phone] • Fax: [phone] • Int'l Fax: [phone] • GSA Schedule Available
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005
Spec sheets and updates are also available at www.leviton.com
ACCESSORIES
Description 2" x 2" 2" x 4" 4" X 4" 4" x 8" 4" x 12"
Radius Guide (10 Packs fit slotted duct) SRAGD-SLT SLEND-CAP SRAGD-SLT
Joiner S2JNR-SLT S4JNR-SLT S8JNR-SLT
Slotless Joiner S4JNR-SLS S8JNR-SLS SWJNR-SLS
*NOTE: Must also order SSLOT-200 for 2"x4" duct.
END CAPS
Description 2" x 2" 2" x 4" 4" x 4" 4" x 8" 4" x 12"
End Cap SLEND-CAP S4END-CAP S8END-CAP
End Cap Slotless S4END-CSL S8END-CSL SWEND-CSL
End Cap - 2" x .75" Diameter Knockout S2END-20D
End Cap - 1" x 1.5" Diameter Knockout S2END-38D
End Cap - 1" x 1.5" Hole S2END-38H
End Cap - Tube Outlet for2" Tube S2END-OUT
End Cap - 2" x 1.25" Diameter Knockout S4END-32D
End Cap - 2" x 1.75" Diameter Knockout S4END-46D
End Cap (Affix to Top of Cabinet) S4END-CAB
NOTE: Dimensions are listed as height x width. All measurements reflect an approximate conversion from the Metric system.
TOOLS & MOUNTING HARDWARE
Description Part No.
Mitre Box Duct (for use with 2" x 2" ducts) SMTRE-050
Mitre Box Duct Kit (for use with 2" x 4", 4" x 4", 4" x 8", and 4" x 12" ducts) SMTRE-300
2" x 4" End Slot Cut Out Tool (for 2"x4" ducts that requires end slots)* SSLOT-100
4" and 8" End Slot Cut Out Tool (for 4"x4" & 4"x8" duct) SSLOT-200
2" x 2" Side Cut-Out Tool Kit (prepares duct for 2"x2" Side Drop Off Kit) S2CUT-TOL
2" x 4" and 4" x 4" Side Cut-Out Tool (use with 2"x4" or 4"x4" Side Drop-Off Kit) S4CUT-TOL
2" x 2" Duct Mounting Bracket S2DMB-000
2" x 4" and 4" x 4" Duct Mounting Bracket S4DMB-000
4" x 8" Duct Mounting Bracket S8DMB-000
4" x 12" Duct Mounting Bracket SWDMB-000
2" x 2" Ladder Rack (or Unistrut) Mounting Kit S1LRU-000
2" x 4" and 4" x 4" Ladder Rack (or Unistrut) Mounting Kit S4LRU-000
4" x 8" Ladder Rack (or Unistrut) Mounting Kit S8LRU-000
4" x 8" Ladder Rack (or Unistrut) Mounting Kit (Heavy Duty for Over Capacity) S8LRU-000
4" x 12" Ladder Rack (or Unistrut) Mounting Kit SWLRU-000
4" x 4" Suspension Kit (install from ceiling) S4SUS-KIT
4" x 8" Suspension Kit w/Rod (install from ceiling) S8SUS-KIT
4" x 12" Suspension Kit w/Rod (install from ceiling) SWSUS-KIT
4" x 12" Suspension Kit w/o Rod (install from ceiling) SWSUS-WRD
2" x 4" and 4" x 4" Duct Mounting Kit (install on wall) S4MNT-KIT
4" x 8" Duct Mounting Kit (install on wall) S8MNT-KIT
4" x 4" Extended Ladder Rack (or Unistrut) Mounting Kit S4EXT-KIT
4" x 8" Extended Ladder Rack (or Unistrut) Mounting Kit S8EXT-KIT
2" x 2" Raised Mounting Kit (install on top of cabinet) S1RMK-000
2" x 4" and 4" x 4" Raised Mounting Kit (install on top of cabinet) S4RMK-000
4" x 8" Raised Mounting Kit (install on top of cabinet) S8RMK-000
4" x 12" Raised Mounting Kit (install on top of cabinet) SWRMK-000
4" x 12" Side Mount Bracket (install on 5/8" Threaded Rod) SMHOO-SMB
2" Unistrut Bracket (for use with 4" x 4", 4" x 8", and 4" x 12" ducting) SBRCK-000
Under Floor Mounting Bracket (install on concrete floor) SUFMK-000
Under Floor to Concrete Mounting Kit SUCFM-000
Page 3 of 3
NOTE: Standard color is yellow. For other colors, replace “S” as the first letter of the part number with O (orange), E, (black), or G
(grey). Please contact customer service for pricing and availability of non-standard colors.