Installation Guide

ManualsBrandsLeviton ManualsSmart Home15 Amp Decora Smart with HomeKit Technology Switch, Works with Siri (2-Pack)

LIMITED 5 YEAR WARRANTY AND EXCLUSIONS

Leviton warrants to the original consumer purchaser and not for the beneﬁt of anyone else that

this product at the time of its sale by Leviton is free of defects in materials and workmanship under

normal and proper use for ﬁve years from the purchase date. Leviton’s only obligation is to correct

such defects by repair or replacement, at its option. For details visit www.leviton.com or call

1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of

this product or reinstallation. This warranty is void if this product is installed improperly or in an

improper environment, overloaded, misused, opened, abused, or altered in any manner, or is

not used under normal operating conditions or not in accordance with any labels or instructions.

There are no other or implied warranties of any kind, including merchantability and ﬁtness

for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the

duration of any such implied warranty, including merchantability and ﬁtness for a particular purpose,

is limited to ﬁve years. Leviton is not liable for incidental, indirect, special, or consequential

damages, including without limitation, damage to, or loss of use of, any equipment, lost

sales or proﬁts or delay or failure to perform this warranty obligation. The remedies provided

herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise

DI-000-DH15S-02A

FOR CANADA ONLY

For warranty information and/or product returns, residents of Canada should contact

Leviton in writing at Leviton Manufacturing of Canada Ltd to the attention of the Quality

Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or

by telephone at 1-800-405-5320.

TECHNICAL SUPPORT

For additional information contact Leviton’s Technical Support at:

1-800-824-3005 or visit Leviton’s website at www.leviton.com

INSTALLATION

INSTRUCTIONS

Leviton Decora Smart

Switch with HomeKit

Technology

Cat. No. DH15S

Universal Electronic Switch

Rated: 120/277 VAC, 60 Hz

1800W Incandescent

5A, 600W LED/CFL

15A (120 VAC) Fluorescent

8A (277 VAC) Fluorescent

15A Resistive

1/2 HP Motor

Use Siri

or the

Leviton Decora

Smart Home

app on your

iPhone or iPad

for home control

Testing your Switch prior to mounting in wall box:

Switch Mounting:

TURN OFF POWER AT

CIRCUIT BREAKER OR FUSE.

• Restore power at circuit breaker or fuse.

• Press pad until locator light is OFF. Lights

should turn ON.

If lights do not turn ON, refer to the

TROUBLESHOOTING section.

Step 5

• Position all wires to provide room in outlet

wall box for switch.

• Ensure that the word "TOP" is facing up

on switch strap.

• Partially screw in mounting screws in wall

box mounting holes.

NOTE: Dress wires with a bend as shown

in diagram in order to relieve stress when

mounting switch.

Step 6

Installation may now be completed by

tightening mounting screws into wall

box. Attach wallplate.

Restore Power:

Restore power at circuit breaker or fuse.

Installation is complete.

Step 7

NOTE: The locator light will illuminate when the load is in the OFF position to

facilitate access in the dark.

Rocker Pad (Default settings)

Turn ON from OFF position:

Tap top of rocker – Lights turn ON.

Turn OFF from ON position:

Tap bottom of rocker – Lights turn OFF.

If there is a power outage, when the power is restored, the lights will return to

the last setting before the power interruption.

Cleaning: Clean with a damp cloth. DO NOT use chemical cleaners.

OPERATION

Rocker

Locator

Light

This device complies with Part 15 of the FCC Rules. Operation is subject to

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation of the device.

This equipment has been tested and found to comply with the limits for a

Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment OFF and ON, the user is

encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving Antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/tv technician for help.

FCC CAUTION

Any changes or modiﬁcations not expressly approved by Leviton Manufacturing

Co., Inc., could void the user's authority to operate the equipment.

FCC COMPLIANCE STATEMENT

IC COMPLIANCE STATEMENT

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

• Lights Flickering

- Lamp has a bad connection.

- Wires not secured ﬁrmly with wire connectors of switch or terminal screws of remote.

• Light does not turn ON and Locator LED does not turn ON

- Circuit breaker or fuse has tripped.

- Lamp is burned out.

- Neutral not wired to switch (White wire).

- Conﬁrm that the switch is being supplied from a 120/277V AC, 60 Hz source ONLY.

• Remote does not operate lights

- Ensure that total wire length does not exceed 300 ft.

- Ensure wiring is correct.

TROUBLESHOOTING

LEVITON DECORA SMART

FEATURES

Leviton Decora Smart

products contain unique features which can be conﬁgured

via the Leviton Decora Smart Home app.

Locator LED Setup:

Leviton Decora Smart

Switches have a locator LED on the bottom of the paddle.

The LED can be used to locate the switch in the dark, indicate the current load status

or can be turned OFF at all times.

• Status Mode: Uses the LED to reﬂect the current state of the light. If the light is

currently ON, the LED is ON, if the light is currently OFF, the LED is OFF.

• Locator Mode (default): Uses the LED to help ﬁnd the switch in a dark room. If the light

is currently OFF, the LED is ON, if the light is currently ON, the LED is OFF.

• LED OFF: Places the LED is a permanently OFF state.

LED Level Indicator Timeout

The LED indicators on the side of the switch can be programmed to be ON, OFF, or timeout

after a predeﬁnded period of time.

• Level Indicators OFF

• Level Indicator Timeout (seconds) (default is 3 seconds)

• Levels Indicators Always ON

WAC RESET

SETUP

FACTORY DEFAULT

In situations where a switch needs to be returned to factory default follow these steps:

• Hold the top of the paddle for a total of 14 seconds.

- After the ﬁrst 7 seconds the LED turns amber.

- Continue to hold the top of the paddle until the Locator LED quickly ﬂashes red/amber.

• Release the top of the paddle and the switch will reset.

Leviton Decora Smart

accessories are compatible with a variety of HomeKit-enabled

apps. Leviton recommends using the Leviton Decora Smart Home app to add and

conﬁgure Leviton HomeKit-enabled accessories and to access advanced features.

• Download the Leviton Decora Smart Home app from the App Store.

• Ensure the Leviton accessory is properly wired and power

is applied.

• Upon initial power-up the Locator LED will ﬂash green to show the accessory is ready.

• If the Locator LED is no longer ﬂashing green when you are ready to add the accessory

proceed to the WAC Reset procedure.

decora smart™

Decora is a registered trademark of Leviton Manufacturing Co., Inc.

Apple, iPhone, iPad, Apple TV and Siri are trademarks of Apple Inc., registered in the U.S.

and other countries. HomeKit is a trademark of Apple Inc.

Use herein of third party trademarks, service marks, trade names, brand names and/

or product names are for informational purposes only, are/may be the trademarks of their

respective owners; such use is not meant to imply afﬁliation, sponsorship, or endorsement.

No part of this document may be reproduced, transmitted or transcribed without the express

written permission of Leviton Manufacturing Co., Inc

ADDING AN ACCESSORY

HomeKit

technology makes adding a HomeKit-enabled accessory to the home

network quick and easy.

• When the accessory is ready for enrollment the Locator LED will ﬂash green.

• If the Locator LED is not ﬂashing green, proceed to the WAC Reset section to prepare

the accessory for learning.

• Ensure the iPhone or iPad is joined to your wireless network before adding the

accessory.

• During the initial installation follow app instructions or press +

to add an accessory.

In situations where a wireless access point or password is

changed but the conﬁguration of the dimmer needs to remain, use

the following WAC Reset procedure. This procedure can also be

used to place the accessory in ready mode with the locator LED

ﬂashing green:

• Hold the top of the paddle for 7 seconds.

- After 7 seconds the Locator LED will blink amber.

• Release the top of the paddle and the switch will reset.

• Once the switch has reset the Locator LED will blink green.

WEB VERSION

Summary of content (2 pages)

PAGE 1
Step 5 Testing your Switch prior to mounting in wall box: • Position all wires to provide room in outlet wall box for switch. • Ensure that the word "TOP" is facing up on switch strap. • Partially screw in mounting screws in wall box mounting holes. NOTE: Dress wires with a bend as shown in diagram in order to relieve stress when mounting switch. Leviton Decora SmartTM Switch with HomeKitTM Technology SETUP Leviton Decora SmartTM accessories are compatible with a variety of HomeKit-enabled apps.
PAGE 2
WARNINGS AND CAUTIONS WARNINGS AND CAUTIONS • • • • • • • • • • • Step 1 WARNING: TO AVOID FIRE SHOCK OR DEATH; INTRODUCTION Leviton’s Decora SmartTM accessories are designed to streamline home control with other HomeKit-enabled accessories. Apple HomeKitTM technology provides an easy, secure way to control HomeKit-enabled accessories using Siri voice control on your iPhone or iPad.