Specification

PRODUCT DATA
Leviton Mfg. Co., Inc. Lighting Management Systems
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: [phone] www.leviton.com/lms
© 2010 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
LevNet RF Remote Switches
LevNet RF Self-Powered
Wireless Solutions
Remote Switches
Self-Powered Wireless technology means no
wiring is required. Leviton LevNet RF Self-Powered
Wireless Solutions are easy to install and main-
tenance-free, utilizing no batteries and free to
operate, saving ongoing labor and material costs
while saving energy.
LevNet RF devices offer zero power consumption
and zero maintenance for recurring savings for
the building owner. EnOcean® technology allows
energy harvesting LevNet RF Transmitters to
operate indefinitely without the use of batteries.
The human motion of a switch actuation, light
on a solar cell, or temperature differentials in
the environment provide power to LevNet RF
Transmitters, eliminating additional expenses to
the end user’s energy bill and allowing zero main-
tenance wireless devices. The LevNet RF line
includes multiple products that operate in the
uncrowded 315MHz band offering greater trans-
mission range (50-150 feet) than other wireless
technologies and minimal competitive traffic.
LevNet RF Remote Switches can control an
unlimited number of LevNet RF Receivers that
are in range. LevNet RF Remote Switches use
no wires or batteries resulting in zero power
consumption and no energy used. Pressing the
switch or inserting a key card into a holder pro-
vides the energy to transmit a wireless signal
that controls lights or other devices connected
to LevNet RF Receivers. Wireless Switches are
primarily used to control lights in businesses or
homes, but they can be used to control virtually
any on/off device.
Each Self-Powered Wireless Remote Switch can
be placed anywhere within range of a Receiver.
Traditionally the Remote Switch is surface
mounted on a wall with screws or industrial tape,
but can also be used in a standard switch box
or as a wireless handheld remote. The unique
ID of each Switch activates only the intended
Receiver(s). Wireless, self-powered technologies
make them the ideal solution for retrofits and
new construction. Installation is quick and easy
with no additional wiring required. It takes only
minutes to install and configure.
APPLICATIONS
• Retrofits • New construction
• Conference rooms • Classrooms
• Lounges/Lobbies • Private offices
• Executive offices • Restrooms
• Daycare facilities • Multimedia areas
• Multi-location (3-way or 4-way) switching
applications
Single Push
ON/OFF Switch
Rocker
Switch
Dual Rocker
Switch
Handheld 4-Button
Remote
3 x 3
Rocker Switch
Hotel
Key Card
Holder
3 x 3 Dual
Rocker Switch