Cut Sheet

PRODUCT DATA
Leviton Mfg. Co., Inc. Lighting & Energy Solutions
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: [phone] www.leviton.com/les
© 2015 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
LevNet RF™ 902 MHz Control Transmitter
LevNet RF™ 902 MHz Control Transmitter
For use with LevNet RF 902 MHz products
The LevNet RF™ 902 MHz Control
Transmitter communicates with LevNet
RF receivers that control virtually any ON/
OFF device. The sensors can be used for
temperature control and occupancy/vacancy
sensing. Self-powered RF technologies make
them the ideal solution for retrofits and new
construction. Installation is quick and easy
with no additional wiring required.
To control loads, the LevNet RF Control
Transmitter replaces wires between an
electrical load and a switch with an RF control
signal. The 1/2-14 NPS threaded mount
control extender connects to a standard
switch and communicates to distant LevNet
RF receivers controlling loads. The control
transmitter senses the power state of a
wired switch, light or other device, and when
powered transmits to a LevNet RF receiver to
control another load.
EnOcean
®
technology allows reliable
long range LevNet RF™ transmitters to
communicate with load controlling receivers.
The LevNet RF line includes multiple
products operating in the uncrowded 902
MHz radio frequency (RF) band, offering
greater transmission range (50-150’) than
other wireless technologies with minimal
competitive traffic.
FEATURES
•Easy-to-use — eliminates switch-leg runs
•Reliable range — unique ID of each control
transmitter activates only the intended
receiver(s)
•Saves energy — conserves energy
and saves money by using the control
transmitter in load shedding or energy-
efficient HVAC control applications;
connects HVAC, lighting, or other devices
to a relay receiver to turn them OFF and
ON automatically in sync with any device
connected to a control extender
• Simple wireless control — economy
HVAC controls, interlocked motor
control, and secondary circuit follows
power status of primary circuit
• Control the way you want it — controls
one or multiple new devices with an
existing switch and senses power state
of one device, and wirelessly controls a
receiver connected to another device
APPLICATIONS
•Daylightharvesting
•Demandresponse/loadshedding
•Landscapelighting
•Retrofits
•Newconstruction
•Conferencerooms
•Classrooms
•Privateoffices
•HVAC
•Housesofworship
•Shop/Garage
•Gymnasium
•Restaurants