User's Manual

GETTING STARTED
1. Plug the power cord into an electrical outlet.
2. Power the unit by pressing the switch to
the on position.
3. Open the lid by pressing the lock button
located below the lid to release the latch.
4. Press and hold the RELEASE button to
remove the reservoir along with all
removable parts inside.
5.
Rinse all removable parts with warm, soapy
water and dry before placing back into your
LĒVO (see full cleaning instructions later in
this manual).
6. Make sure the silicone nozzle is securely
re-attached to the reservoir spout. Hold
down the release button while lowering the
reservoir back into place, directing the
nozzle through the dispense opening. Let go
of the RELEASE button when the reservoir is
securely in place.
08