Powered by U S E R M ANUAL Smart True HEPA Air Purifier Model: Core 200S Questions or Concerns? Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT at support@levoit.com or at (888) 726-8520. D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.
Specifications Table of Contents Package Contents Specifications Safety Information Getting to Know Your Smart Air Purifier Controls Getting Started VeSync App Setup Using Your Smart Air Purifier VeSync App Functions About the Filter Care & Maintenance Troubleshooting VeSync App Troubleshooting FCC Statement Warranty Information Customer Support 2 2 3 4 5 6 7 8 9 10 12 14 16 17 18 19 Voltage AC 120V, 60Hz Rated Power 37W Effective Range ≤ 183 ft² / 17 m² CADR 118 CFM / 200.
S A F E T Y I N F O R M AT I O N To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines. General Safety Power & Cord • Only use your air purifier as described in this • Keep the air purifier near the outlet it is plugged into. manual. • Do not use without removing the plastic wrap from the filter. The air purifier will not filter air, and may overheat, causing a fire hazard. • Do not use the air purifier outdoors.
G E T T I N G TO K N O W YO U R S M A R T AIR PURIFIER A. B. C. D. E. F. G. Fan Speed Indicators Fan Speed Button On/Off Button Sleep Mode Button Timer Button Timer Indicators WiFi® Indicator H. I. J. K. L. M. N. Night Light Button Display Lock Button Check Filter Indicator Display Off Button Air Outlet Housing Air Inlet A G B H O. Power Cord P. Filter Cover Q. True HEPA Filter C D I E K P J F Q L M N O Front Back, upside down 4 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.
CONTROLS On/Off Button • Turns the air purifier on/off. • Press and hold to configure the air purifier. See the VeSync in-app instructions for more information. WiFi Indicator • Turns on, off, or blinks to indicate configuration status. See the VeSync in-app instructions for more information. Fan Speed Button Night Light Button • Turns the night light on/off (see page 9). Display Off Button • Turns the display off (not including the night light). • Tap any button (except ) to turn the display back on.
G E T T I N G S TA R T E D 1. Flip the air purifier over. Twist the filter cover counterclockwise and remove it. [Figure 1.1] 2. Remove the filter from its plastic packaging and place the filter back into the air purifier. [Figure 1.2] 4. Place the air purifier on a flat, stable surface with the display facing up. Allow at least 15 in / 38 cm of clearance on all sides of the air purifier. Keep away from anything that would block airflow, such as curtains. [Figure 1.4] 3.
VESYNC APP SETUP 1. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store. [Figure 2.1] 2. Open the VeSync app. Log In or Sign Up. 3. Follow the in-app instructions to set up your smart air purifier. Figure 2.1 CONNECT WITH AMAZON ALEXA OR G O O G L E A S S I S TA N T ™ You can use the VeSync app to connect your smart air purifier to Amazon Alexa or Google Assistant™. Please follow in-app instructions to set up your voice assistant.
U S I N G YO U R S M A R T A I R P U R I F I E R Note: Using the VeSync app allows you to control your air purifier remotely and access additional functions and features. General Operation 1. Sleep Mode Sleep Mode dims all icons to half brightness and operates quietly by using a fan speed lower than fan speed I. Tap Plug in and tap to turn on the air purifier. The fan will start on level I. [Figure 3.1] to turn Sleep Mode on. Note: • Tapping will exit Sleep Mode.
Night Light You can choose between 2 night light brightness levels, even when the air purifier is turned off (as long as it is still plugged in). 1. Tap once to turn on the light. 2. Tap a second time to dim the brightness to half. 3. Tap a third time to turn off the light. Note: Turning off the display will not turn off the night light. VESYNC APP FUNCTIONS The VeSync app allows you to access additional smart air purifier functions, including those listed below.
A B O U T T H E F I LT E R The air purifier uses a 3-stage filtration system to purify air. A B C A. Nylon Pre-Filter • Captures large particles such as dust, lint, fibers, hair, and pet fur. • Maximizes the filter’s life by protecting it. B. True HEPA Filter • Removes at least 99.97% of airborne particles 0.3 micrometers (µm) in diameter. C. High-Efficiency Activated Carbon Filter • Physically adsorbs smoke, odors, and fumes.
ABOUT THE FILTER (CONT.) Clean Air Delivery Rate Humidity This air purifier has a Clean Air Delivery Rate of 118 cubic feet per minute (CFM), or 200.6 m³/h. Moisture may damage the filters. This air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter will become moldy.
CARE & MAINTENANCE Cleaning the Air Purifier Resetting the Check Filter Indicator • Unplug before cleaning. Reset the Check Filter Indicator when: • Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry. A. lights up red. 1. Replace the filter (see page 13). 2. Turn on the air purifier. • Vacuum the inside of the air purifier. 3. • Do not clean with abrasive chemicals or flammable cleaning agents.
CARE & MAINTENANCE (CONT.) When Should I Replace the Filter? Replacing the Filter 1. Check the VeSync app to see your remaining filter life. The filter should be replaced every 6–8 months. You may need to replace your filter sooner or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if is off.
T R O U B L E S H O OT I N G Problem Possible Solution Plug in the air purifier. Air purifier will not turn on or respond to button controls. Check to see if the power cord is damaged. If so, stop using the air purifier and contact Customer Support (see page 19). Plug the air purifier into a different outlet. The air purifier may be malfunctioning. Contact Customer Support (see page 19). Make sure the filter is removed from its packaging and properly in place (see page 6).
TROUBLESHOOTING (CONT.) Problem Possible Solution Tap to increase the fan speed. Make sure no objects are blocking the sides or top of the air purifier (the inlet or outlet). Poor air purification quality. Make sure the filter is removed from its packaging and properly in place (see page 6). Close doors and windows while using the air purifier. Make sure the room is smaller than 183 ft² / 17 m². The air purifier may not be as effective in larger rooms. Replace the filter (see page 13).
V E S Y N C A P P T R O U B L E S H O OT I N G My smart air purifier isn’t connecting to the VeSync app. • During the setup process, you must be on a secure 2.4GHz WiFi network. Confirm that the network is working correctly. • Make sure the WiFi password you entered is correct. ◦ There should be no spaces at the beginning or end of the password. ◦ Test the password by connecting a different electronic device to the router.
F C C S TAT E M E N T This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
WA R R A N T Y I N F O R M AT I O N Product Name Model Default Warranty Period Smart True HEPA Air Purifier Core 200S 1 year For your own reference, we strongly recommend that you record your order ID and date of purchase. Date of Purchase Order ID Terms & Policy Arovast Corporation (“Arovast”) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of one year from the date of original purchase.
C U S TO M E R S U P P O R T If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Arovast Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@levoit.com Toll-Free: (888) 726-8520 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your order invoice and order ID ready before contacting Customer Support. Trademark Information Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
/ L E VO I T L I FE ST Y L E / L E VO I T / L E VO I T / L E VO I T L E VO I T.C O M A2-01.02_D_20G08 D1_01.02_M1_Core200S_2020-06-23_PRINT_US_en.
