U S ER M ANUAL Levoit PlasmaPro™ 600S Smart True HEPA Air Purifier Product Series: Core 600S Model: LAP-C601S-WUSR Questions or Concerns? Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT at support@levoit.com or at (888) 726-8520.
Table of Contents Package Contents 2 Specifications 2 Safety Information 3 Getting to Know Your Smart Air Purifier 4 Controls & Display 5 Getting Started 7 Using Your Smart Air Purifier 9 About the Filter 14 Care & Maintenance 16 Troubleshooting 18 VeSync App Troubleshooting 20 Warranty Information 22 Customer Support 23 Specifications Power Supply AC 120V, 60Hz Rated Power 49W Ideal Room Size 635 ft² / 59 m² • This Ideal Room Size is based on 5 air changes per hour (ACH).
READ AND SAVE THESE INSTRUCTIONS SAFETY INFORMATION To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines. General Safety • • • • • • • • • • • • • • • • Only use your air purifier as described in this manual. Do not use without removing the plastic wrap from the filter. The air purifier will not filter air, and may overheat, causing a fire hazard. Do not use the air purifier outdoors. Keep the air purifier away from water, and wet or damp areas.
G E T T I N G TO K N O W YO U R S M A R T A I R P U R I F I E R A. Fan Speed Indicators B. Fan Speed Button C. Sleep Mode Button / Check Filter Indicator Reset Button D. Air Quality Indicator Rings E. Plasma Button F. Light Sensor G. Timer Button H. On/Off Button I. Check Filter Indicator J. Wi-Fi® Indicator K. L. M. N. O. P. Q. R. S. T. U. V. A Auto Mode Button Display Lock Indicator Display Off Button PM2.
C O N T R O L S & D I S P L AY Note: You can also use the VeSync app to control these functions, as well as additional app-only features (see page 13). On/Off Button • Turns the air purifier on/off. • Press and hold for 5 seconds to configure the air purifier. See the VeSync in-app instructions for more information. • Press and hold for 15 seconds to reset the air purifier and disconnect from Wi-Fi (see page 8).
CONTROLS & DISPLAY (CONT.) Display Off Button • Turns the display off (see page 11). • Tap any button (except ) to turn the display back on. Display Lock Button • Prevents current settings from being changed (see page 11). Press and hold for 3 seconds to turn Display Lock on/off. • The Display Lock Indicator ( ) will blink when any other button is tapped to indicate that Display Lock is on. Plasma Button • Turns the Plasma function on/off (see page 12).
G E T T I N G S TA R T E D 1. Place the air purifier on a flat, stable surface with the display facing up. Twist the top half of the air purifier counterclockwise and lift up to remove it. [Figure 1.1] 3. Place the top half of the air purifier directly back onto the bottom half of the air purifier, aligning each corner. Press down to snap the top into place. [Figure 1.3] a. The top of the air purifier can face in any direction, as long as the corners align. Figure 1.1 2.
GETTING STARTED (CONT.) VeSync App Setup Note: Due to ongoing updates and improvements, the VeSync app may be slightly different than shown in the manual. In case of any differences, follow the in-app instructions. 1. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store. Wi-Fi Connection: • To disconnect Wi-Fi, press and hold the On/Off button for 15 seconds until the Wi-Fi indicator turns off.
U S I N G YO U R S M A R T AIR PURIFIER Note: Using the VeSync app allows you to control your air purifier remotely and access additional functions and features (see page 13). 1. Plug in and tap to turn on the air purifier. [Figure 2.1] 2. Optionally, tap to change fan speed between low, medium, high, and turbo. Sleep Mode Sleep Mode operates quietly by using a fan speed lower than low speed. 1. Tap to turn Sleep Mode on/off. 2.
USING YOUR SMART PURIFIER (CONT.) Auto Mode PM2.5 Display Auto Mode uses AirSight Plus™, a smart laser dust sensor inside the air purifier, to adjust the fan speed automatically based on air quality. For example, if the air quality is bad, the fan will automatically be set to high speed. The PM2.5 value on the display shows the amount of airborne particles (µg) that are detected per 1 cubic meter (m³) of air volume.
USING YOUR PURIFIER (CONT.) Timer Display Off You can set a timer for 1–12 hours. This turns off the display lights on the air purifier, including button lights and indicator lights (except the Check Filter Indicator). 1. Tap . The display will switch from showing the PM2.5 reading to the time you’ve selected. 2. Tap repeatedly to select a time in 1-hour increments. If you don’t touch any buttons for 5 seconds, the display will switch to showing the PM2.
USING YOUR PURIFIER (CONT.) Standby Mode Plasma Function The air purifier is in Standby Mode when it is turned off, but plugged in. The Plasma Function uses “Plasma Technology Name” to generate positive and negative ions that bind with pollutants and neutralize them by breaking down their molecular structure. Note: Display Lock can be used while the air purifier is in Standby Mode to keep the air purifier from being turned back on.
USING YOUR PURIFIER (CONT.) VeSync App Functions The VeSync app allows you to access additional smart air purifier functions, including those listed below. As the app develops, more features may become available. Auto Mode • Access additional auto modes: Quiet Auto Mode, Efficient Auto Mode, and ECO Auto Mode. • Quiet Auto Mode only uses the low and medium fan speeds, even when the air quality is poor, to avoid making too much noise.
A B O U T T H E F I LT E R The air purifier uses a 3-stage filtration system to purify air. A B C A. Pre-Filter • Captures large particles such as dust, lint, fibers, hair, and pet fur. • Maximizes the filter’s life by protecting it. C. Custom High-Efficiency Activated Carbon Filter • Physically adsorbs smoke, odors, and fumes. • Customized using Levoit’s exclusive ARC Formula™ to be especially effective for cooking smells and pet odors in a multi-pet household.
ABOUT THE FILTER (CONT.) Clean Air Delivery Rate Humidity This air purifier has a Clean Air Delivery Rate of 410 cubic feet per minute (CFM), or 697 m³/h. Moisture may damage the filter. This air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter may become moldy.
CARE & MAINTENANCE Cleaning the Smart Air Purifier Cleaning the Filter • Unplug before cleaning. • Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry. • Vacuum the inside of the air purifier. The outer pre-filter should be cleaned every 2–4 weeks to increase efficiency and extend the life of your filter. Clean the pre-filter using a soft brush or vacuum hose to remove hair, dust, and large particles.
CARE & MAINTENANCE (CONT.) When Should I Replace the Filter? The filter should be replaced every 6–12 months. You may need to replace your filter earlier or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if is off.
T R O U B L E S H O OT I N G Problem Possible Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If it is, stop using the air purifier and contact Customer Support (see page 23). Plug the air purifier into a different outlet. The air purifier may be malfunctioning. Contact Customer Support (see page 23). Airflow is significantly reduced.
TROUBLESHOOTING (CONT.) Problem Possible Solution Poor air purification quality. Tap to increase the fan speed. Make sure no objects are blocking the sides or top of the air purifier (the inlet or outlet). Make sure the filter is removed from its packaging and properly in place (see page 7). Close doors and windows while using the air purifier. If the room is larger than 635 ft² / 59 m², air purification will take longer. Replace the filter (see page 17). is still on after replacing the filter.
V E S Y N C A P P T R O U B L E S H O OT I N G My smart air purifier isn’t connecting to the VeSync app. • Make sure your phone has Bluetooth® turned on and is not currently connected to another Bluetooth device. • During the setup process, you must be on a secure 2.4GHz Wi-Fi® network. Confirm that the network is working correctly. • Make sure the Wi-Fi password you entered is correct. • There should be no spaces at the beginning or end of the password.
F E D E R A L C O M M U N I C AT I O N C O M M I S S I O N I N T E R F E R E N C E S TAT E M E N T – PA R T 1 5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
WA R R A N T Y I N F O R M AT I O N Product Name Model Levoit PlasmaPro™ 600S Smart True HEPA Air Purifier LAP-C601S-WUSR For your own reference, we strongly recommend that you record your order ID and date of purchase. Date of Purchase Order ID Terms & Policy Arovast Corporation (“Arovast”) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of 2 years from the date of original purchase.
C U S TO M E R S U P P O R T If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Distributed by Arovast Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@levoit.com Toll-Free: (888) 726-8520 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your order invoice and order ID ready before contacting Customer Support.
/LE VO I T /LE VO I T /LE VO I T LI F E ST Y LE /LE VO I T LI F E ST Y LE /LE VO I T LI F E ST Y LE LE VO I T.