Warranty

10
OPERATION (cont.)
Auto Button
Turns on or turns o the automatic sensor
inside the air purifier. This automatic
mode (Auto Mode) adjusts the fan speed
of the air purifier according to the current
air quality to provide clean air for your
living space. The air quality indicator will
also illuminate on the LED display. The
table below shows the dierent colors of
the air quality indicator in correlation to
both air quality & fan speed. [Chart A]
NOTE:
• It will take 1 minute for the dust sensor to detect the air quality each
time Auto Mode is turned on. After 1 minute, the color of the air
quality indicator will change based on the detected air quality.
• You can also tap ‘ ’ or ‘ ’ to turn o the automatic sensor.
Color Air Quality Fan Speed
Red Bad High
Yellow Moderate Medium
Green Good Low
Blue Very Good Sleep Mode
Timer Button
Allows you to program a timer anywhere
from 1 to 12 hours.
1. Tap ‘
’ repeatedly to choose a
time.
2. Once you have reached the desired
time, the display will flash three times
before setting.
3. The air purifier will automatically
power o once the timer has finished
counting down.
4. To cancel the timer, tap ‘ ’
repeatedly until the display reads
“-:--”. Wait until “-:--” flashes three
times.
Chart A
Memory Function
The air purifier will remember its programmed settings
when turned o, and will resume these settings when it is
turned back on. Please note that the air purifier must remain
plugged in for this memory function to work.