Operating Instructions

Q Read & Save These
Operating Instructions Instructions
Page 7 of 14
4.2 HOW TO PAIR SWITCHES AND CONTROLLERS TOGETHER
Press and release the ‘Pair’ button on the controller. The LED on the
controller will flash green.
NOTE: If there is no pairing request received within 60 seconds, the
controller will quit the pairing procedure and the LED will return to a solid
green indicator.
Squeeze then quickly release both ends of the switch. On release, the
switch sends a unique pair code to the controller. The controller LED status
indicator will flash green/red to confirm receipt.
Press ‘Pair’ on the controller to confirm the pairing. The LED will flash green
to indicate success.
4.3 HOW TO RESET THE NETWORK GROUP CONFIGURATION
To clear the Q’s network group, press and hold the ‘Pair’ button for 5
seconds. The LED will flash red to indicate the network group information
has been cleared.
4.4 CLEAR ALL SETTINGS / FACTORY DEFAULT
To clear all settings and return Q to its factory default, first power on Q
then press and hold the reset button for 10 seconds. The LED status
indicator will flash 8 times.