Quick Start Guide

// Getting started
1 Connect your microphone to your mixing console, audio interface or microphone preamplifi er using a 3-pin XLR cable.
2 Set the input gain on your mixing console, preamp, etc. accordingly.
3 To ensure best sound quality, do not cover any part of the grille.
4 Rock!
// Overview
// Dynamic percussion microphone
// Supercardioid polar pattern for effective isolation of the main
sound source
// Tailored frequency response for drum and percussion applications
// Integrated acoustic pop and windshield - washable
// Solid full-metal die-cast body
// Hardened steel mesh
// Gold plated & corrosion-resistant 3-pin XLR output connector
Top applications // Toms, drums and percussion
// Please Note
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme
temperatures.
// When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Do not attempt to modify or fi x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.
// The integrated acoustic pop and windshield can be washed with soap water, if necessary.
LEWITT
®
Burggasse 79
1070 Vienna
Austria
www.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
READ THE
FULL MANUAL!
LEARN EVERYTHING ABOUT YOUR DTP 340 TT
www.lewitt-audio.com/resources/manuals/DTP-340-TT.pdf
QUICKSTART GUIDE
PERFECT PERCUSSION MULTIPURPOSE PERCUSSION MICROPHONE FOR RICH AND PUNCHY SOUND
// DTP 340 TT