User Manual

// MTP 250 DM/DMs
QUICKSTART GUIDE
THE PERFECT ENTRY FOR EVERY STAGE WIRED HANDHELD DYNAMIC MICROPHONE FOR AMBITIOUS PERFORMANCES
// Getting started
1 Connect your microphone to your mixing console, audio interface or preamp with a 3-pin XLR cable.
2 Check the On/Off switch (MTP 250 DMs only).
3 Set the input gain on your mixing console, preamp, etc. accordingly.
4 To ensure best sound quality, do not cover any part of the grille.
5 Rock!
// Please Note
// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme
temperatures.
// Do not use force on the switch (MTP 250 DMs only) or cable of the microphone.
// When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Do not attempt to modify or x the microphone, as it would void your product warranty.
// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.
// The integrated acoustic pop and windshield can be washed with soap water, if necessary.
// Overview
// Dynamic handheld microphone
// Cardioid polar pattern for effective isolation of the main sound source
// Frequency response shaped specically for vocal applications
// Integrated acoustic pop and windshield - washable
// Solid full-metal, die-cast body
// Hardened steel mesh grille
// Gold plated & corrosion-resistant 3-pin XLR output connector
// On/Off switch (MTP 250 DMs only)
Top applications // Vocals, spoken word and live interviews
LEWITT
®
Burggasse 79
1070 Vienna
Austria
www.lewitt-audio.com
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.