The entrance to the world of large-diaphragm condenser MORE CAPSULE, MORE SOUND // LCT 450 User Manual 1
// Index Intro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features and top applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
// Intro Thank you for choosing the LEWITT LCT 450! The LCT 450 delivers exceptionally high value for money, that makes the LCT 450 a true studio workhorse and a perfect candidate for building up your microphone collection.
// Features // Top applications // LEWITT’s entrance to the world of large diaphragm condenser microphones at an affordable price // Natural authentic sound with first-class transient response // A perfect choice for vocals, overheads and acoustic instruments // Cardioid polar pattern for effective rear sound rejection // 1-inch capsule in a small housing // Corrosion-resistant gold-plated 3-pin XLR output connector // Illuminated user interface for quick and easy handling in dark environments // Noiseles
// User Interface 1 Status Indicator // Indicates different active settings such as key lock, automatic attenuation, clipping history ... see below for details. 2 Low-cut filter // Use to reduce unwanted low frequency noise caused by wind, footsteps, structure-borne noise or likewise. The low-cut filter at 80Hz affects the microphone input by 12 dB per octave and can be set by pressing the left pushbutton 4 . 3 Pre-Attenuation // Use this pad function to prevent clipping when recording very loud sources.
5 Right pushbutton // Push to change attenuation settings. Also activates Automatic Attenuation. Automatic Attenuation // Pressing the right push button for more than two seconds activates (Status Indicator 1 turns red) and deactivates (Status Indicator 1 turns white) Automatic Attenuation. In this mode the microphone adjusts the attenuation setting automatically when clipping has occurred.
// Tech Data Acoustical operating principle // pressure gradient transducer, externally polarized Transducer Ø // 25.4 mm / 1 inch Polar pattern // Cardioid Frequency range // 20 ... 20,000 Hz Sensitivity // 16 mV / Pa (-36 dBV) Signal / noise ratio // 79 dB (A) Equivalent noise level // 15 dB (A) Dynamic range of FET Mic. Amp. // 138 dB (A) Max.
// Safety Guidelines // The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress and force. // To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures. // Keep this product out of the reach of children. // Do not use force on the switch or cable of the microphone. // When disconnecting the microphone cable, grasp the connector and do not pull the cable.
// Warranty All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt. LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at LEWITT’s discretion either by repair or by exchanging individual parts or the entire appliance.
// Regulatory Information Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.