ADD MORE www.lewitt-audio.com POWER TO YOUR TUNES.
MTP 240 DM / DMs Introduction Thank you that you have opted for a LEWITT product. In this operating manual you will learn more about your LEWITT microphone, its handling and its proper usage. Music professionals know that it’s often the smallest details that make all the difference in vocal and instrumental recordings. With our MTP series, we aim to exceed artists’ and audio engineers’ expectations of reproduction accuracy and isolation of the main sound source.
MTP 240 DM / DMs The product The MTP 240 DM and MTP 240 DMs are rugged and exceptionally feedback-safe dynamic cardioid microphones tuned specifically for vocal applications. Perfectly suited for use in live performances and ambitious home studio recordings, these dynamic microphones please entry-level vocalists and professionals alike. Using state-of-the-art microphone technology, the MTP 240 DM and DMs are engineered to provide sound reproduction with exceptional clarity and detail.
MTP 240 DM / DMs Features / Top applications Features ·Optimized frequency response for vocal applications ·Uniform cardioid polar pattern minimizes unwanted background noise ·Easily withstands high sound pressure levels ·Effective integrated acoustic pop and windshield offers excellent protection without compromising high-frequency clarity ·Highly durable, black all-metal construction, optimized for rough daily touring routine ·Minimally affected by varying load impedance ·The MTP 240 DMs features a conv
MTP 240 DM / DMs Using the mic Connecting and Disconnecting the Microphone Cable ·Before establishing connection, make sure that the microphone and the component (e.g. amplifier) are switched off. ·Lower the volume of the component (e.g. amplifier) before connecting the microphone. ·Insert the connector into the microphone socket. Align the key on the connector with the groove in the microphone, and then push the connector into the microphone until it clicks.
MTP 240 DM / DMs Using the mic / Tech data 49.7 Hints 1. In order to prevent feedback (howling): ·Lower the volume. ·Place the microphone so that it is not pointed to the speaker and that there is a sufficient distance between the microphone and the speaker. ·Do not cover the lower part of the grille with your hand. 2. Positioning the microphone close to the sound source causes the so-called proximity effect (a boost in the low frequency response).
MTP 240 DM / DMs Tech data Tech graph Tech data 5 dB / unit ·Acoustical operating principle: ·Directional pattern: ·Frequency range: ·Sensitivity: ·Rated impedance: ·Connector: ·Dimensions: dB ref . 1V / Pa ·Net weight: dynamic, moving coil cardioid 60 ... 18.000 Hz 2 mV / Pa (-54 dBV) < 280 ohms gold plated 3-pin XLR 49 dia. x 175 mm 1,9 dia. x 6,9 inch 335 g 11,8 oz.
MTP 240 DM / DMs Accessories Accessories MTP 40 MCs DTP 40 Lb 08
MTP 240 DM / DMs Cautions Cautions ·The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical stress and force. ·To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures. ·Keep this product out of the reach of children. ·Do not use force on the switch or cable of the microphone.
MTP 240 DM / DMs Warranty Warranty All products manufactured by LEWITT GmbH feature a limited two-year warranty. This two-year warranty is specific to the date of purchase as shown on your purchase receipt. LEWITT GmbH shall satisfy the warranty obligations by remedying any material or manufacturing faults free of charge at LEWITT’s discretion either by repair or by exchanging individual parts or the entire appliance.
MTP 240 DM / DMs Regulatory information LEWITT GmbH declares under its sole responsibility that MTP 240 DM / DMs complies with the European directive 2004/108/EC. The product has been tested according to harmonized European standards: EN 55013:2001+A1:2003+A2:2006 EN 55020:2007 EN 61000-3-2:2006 EN 61000-3-3:1995+A1:2001+A2:2005 Product testing was carried out by TIMCO Engineering Inc., notified body number 1177. WEEE note: Electronic waste has to be collected separately.
Mooslackengasse 17 1190 Vienna AUSTRIA info@lewitt-audio.