Manual

Connecting and Disconnecting the Microphone Cable

·Before establishing connection, make sure that the microphone and the component

(e.g. amplifier) are switched off.

·Lower the volume of the component (e.g. amplifier) before connecting the microphone.

·Insert the connector into the microphone socket. Align the key on the connector with

the groove in the microphone, and then push the connector into the microphone until

it clicks.

·To disconnect the cable from the microphone, pull the connector away from the

microphone while depressing the latch lock.

How to Use

·Set the switch to ON when using the microphone, set it to OFF when it is not in use (only

applicable if your microphone has an ON/OFF switch).

·When using the microphone, do not cover any part of the grille with your hand to ensure

best sound quality and accurate directivity characteristic.

MTP 440 DM

Using the mic