Full Product Manual

Americas
Headquarters
SABIC Innovative Plastics
Specialty Film & Sheet
One Plastics Avenue
Pittsfield, MA 01201
USA
T 800 451 3147
T 413 448 5400
F 413 448 7506
European
Headquarters
SABIC Innovative Plastics
Specialty Film & Sheet
Plasticslaan 1
PO Box 117
4600 AC
Bergen op Zoom
The Netherlands
T [phone]
F [phone]
Pacific
Headquarters
SABIC Innovative Plastics
Specialty Film & Sheet
1266 Nanjing Road (W)
Unit 902-907, Plaza 66
200040 Shanghai
China
T [phone]
F [phone]
SABIC-SFS-688
THE MATERIALS, PRODUCTS AND SERVICES OF SABIC INNOVATIVE PLASTICS HOLDING BV, ITS SUBSIDIARIES AND AFFILIATES (“SELLER”),
ARE SOLD SUBJECT TO SELLER’S STANDARD CONDITIONS OF SALE, WHICH CAN BE FOUND AT http://www.sabic-ip.com AND ARE
AVAILABLE UPON REQUEST. ALTHOUGH ANY INFORMATION OR RECOMMENDATION CONTAINED HEREIN IS GIVEN IN GOOD FAITH,
SELLER MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (I) THAT THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER
END-USE CONDITIONS, OR (II) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING SELLER’S PRODUCTS, SERVICES
OR RECOMMENDATIONS. EXCEPT AS PROVIDED IN SELLER’S STANDARD CONDITIONS OF SALE, SELLER SHALL NOT BE RESPONSIBLE FOR
ANY LOSS RESULTING FROM ANY USE OF ITS PRODUCTS OR SERVICES DESCRIBED HEREIN. Each user is responsible for making its own
determination as to the suitability of Seller’s products, services or recommendations for the user’s particular use through appropriate
end-use testing and analysis. Nothing in any document or oral statement shall be deemed to alter or waive any provision of Seller’s
Standard Conditions of Sale or this Disclaimer, unless it is specifically agreed to in a writing signed by Seller. No statement by Seller
concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent
or other intellectual property right of Seller or as a recommendation for the use of such product, service or design in a manner that
infringes any patent or other intellectual property right.
SABIC Innovative Plastics is a trademark of SABIC Holding Europe BV
*
Lexan, Solar Control IR, Thermoclear, Thermoclick, Thermopanel, Thermoroof and ZigZag are trademarks of SABIC Innovative Plastics IP BV
®
Dripgard is a trademark of Standard Bent Glass Corp.
© Copyright 2008 SABIC Innovative Plastics IP BV. All Rights Reserved
Contact us
sabic-ip.com
Email
[e-mail]
Film and Sheet