User's Manual

3
To Enroll Fingerprint for Administrator
Note: We suggest you slightly change the angle of your finger for every attempt, allowing the system to
store prints of your pad, both sides, and tip of your finger. Repeat until the scan of your fingerprint is
completed.
How to use F35 Fingerprint Flash Drive
a. Attach the F35 to any available USB port on your computer and the drive should be
recognized automatically.
b. Place your finger (the one that had been enrolled) on the fingerprint sensor with light
and even pressure. You will see the light flash. When the fingerprint is authenticated, you will
see the secure partition and can access the data stored in this partition as shown below.
Partitioning the Flash Drive
a. Run the application “FingerTool_Lexar(Windows)”, and apply the Administrator’s
fingerprint to access the program. Click on the right tab marked “Partition.”
b. Click “NEXT”.
1. Enter your
administrator
name in the
name field.
3. Enroll your
fingerprint
2. You can select
back to restart the
process