JumpDrive ® Fingerprint F35 Flash Drive User Manual for Windows
Contents Before You Start ................................................................................. 1 For Users............................................................................................................... 1 Specifications and Compatibility......................................................................... 1 Fingerprint Management Application ................................................ 1 Registration for Administrators ....................................................
Before You Start For Users Dear User, thank you for purchasing the Lexar JumpDrive Fingerprint F35. The F35 is an integration of biometric identification technology and data storage. Designed for those demanding the highest level of data protection, the drive can safeguard sensitive data against unauthorized access attempts using fingerprint authentication. Data stored in the secure partition is safely protected and can only be accessed when the scanned fingerprint is authenticated.
your computer. This application is designed to set passwords and enroll fingerprints, manage users whose accounts are registered, and change the size of the public and secure partition. To run the fingerprint management application on your computer: a. Attach your F35 to any available USB port on your computer. The drive should be recognized automatically. b. Click on “CD Drive(): Lexar” in the window of “My computer” c. Double click the app icon “FingerTool_Lexar(Windows)” to run the application.
To Enroll Fingerprint for Administrator 1. Enter your administrator name in the name field. 3. Enroll your fingerprint 2. You can select back to restart the process Note: We suggest you slightly change the angle of your finger for every attempt, allowing the system to store prints of your pad, both sides, and tip of your finger. Repeat until the scan of your fingerprint is completed. How to use F35 Fingerprint Flash Drive a.
c. Move the slider left and right to adjust the capacity between the public and the secure partition. Click “Confirm” to begin the process. Please remove and re-insert the flash drive after the drive has been re-partitioned. Managing Administrator and Users’ Accounts This chapter explains how to add, change, delete, and edit accounts. 1.1 Add Accounts. a. Click “+” to start adding accounts.
b. Choose the account type (Administrator/Other Users) and then name the account. Click “NEXT” c. Place your finger on the sensor to register your fingerprint for this new account.
1.2 Edit accounts. a. Choose the account you want to edit and click the fingerprint icon on the right. b. Edit the account type & name and click Confirm. If you want to change the fingerprint, click “Change Fingerprint” c. Place your finger on the sensor to change fingerprint.
1.3 Delete accounts. a. Choose the account you want to delete and click the trash icon in the right. b. Click “Confirm” if you are sure you want to delete the account. Note: The application will not allow you to have zero administrator accounts. You must have at least one administrator account. Managing Password a. Click “Password Verification” on the initial screen when asked for your Fingerprint Verification.
b. Click “Forget Password?” on the password authentication screen. Enter a new password. Before entering, a pop-up window will show Lexar’s suggestion for a new password.
c. Click “Confirm and verify fingerprint” and apply the administrator’s fingerprint to complete the change.
FAQ After plugging in my USB flash drive, why doesn’t my computer recognize it? Please re-attach the flash drive and run the application again. Why does the flash drive show less than the total capacity? The total capacity is divided up between the public partition and secure partition. Users can change the capacity of the secure partition once their fingerprints have been authenticated.
force. How many chances do I have to enter my administrator password correctly? If the user enters an incorrect password more than 254 times in succession, the F35 will start the process of self-destruction. All data in the USB flash drive will be erased, and the F35 can only be recovered by downloading the firmware again. Why can’t I access the secure partition after placing my finger on the fingerprint sensor several times? Ensure your fingerprint and sensor are clean and dry.
