User's Manual

Desk Lamp: 1 pc Manual: 1 pcAdapter: 1 pc
The Chapter I: Features
● High CRI
Using CRI95 above LEDs ,
Perfect color rendering
● 5 Lighting Colors
There are 5 color
temperatures for selection.
● Timer to Auto Shut off
40 and 60 minutes timer
settings
● Original solid beech wood
The shell is made of beech
wood with clear and nature
texture.
● Quick USB Charging Port
5*1A USB charging port
● Touch dimmer
Easy changing the brightness
by touching the bar.
● 15W Wireless Charger
The highest wireless charging
port for quick and easy charge
The Chapter II: accessories
User Manual
Some important cautions and use methods are written in this manual.
Please read it before use and keep it properly
Wooden Desk Lamp
A3
展开尺寸300x136mm 80克铜板纸 黑色双面印刷 折1折 成品尺寸100x136mm
The Chapter III: Buttons Function
A : Power port
B : USB port
Power key (ON/OFF)
Press once to switch on the lighting,again to switch off
1
Lighting color
Select the color by pressing on the key,there are 5 color options.
2
Night light
Press once to set night light mode,again to shut off the mode.
3
Timer
Timer setting key,press once for 40 minutes,twice for 60 minutes, third for
cancel the timer setting.
4
Model No.: GD-TLRW-03A21
FCC ID: 2A69X0A3
Power: 8W (Light)
36W(System)
Wireless Charger: 15W
Input: Light DC12V
Adapter: AC100-240V
50Hz (Adapter)
N.W.: 950g
Brightness control
Slide on the bar to change the brightness.
Timer 30 minute indicator:light up in blue(left part of the bar)
Timer 60 minute indicator:light up in red (right part of the bar)
Wireless Charger
Put the phone on the part to charge it.
*The wireless charge will not power off unless the power cord is
plugged out.
5
6
The Chapter IV: Specification
425mm
356mm
184mm
102mm
36mm
User Manual
Some important cautions and use methods are written in this manual.
Please read it before use and keep it properly
Wooden Desk Lamp
A3
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note:This equipment has been tested and found to comply with the limits
for a class B digital device,pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequence
energy and,if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.However,there
is no guarantee that interference will not occur in a particular installation.
if this equipmemt does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minumum distance
of 20 cm between the radiator and your body.