User's Manual

User Manual
Item: #20004 - LED Candle
Smart Color & Tunable White
WELCOME TO LEXI
USER GUIDE
OPERATION
1. In order to add new devices to your Lexi
Mobile App, first follow the instructions for
connecting your Lexi Portable Hub to your
wireless network.
2. Power on your light(s), you'll see the
light(s) flashing with cool white color
3. Select "ADD NEW DEVICE" on the LEXI
Mobile App and follow the instruction to
complete adding the light(s). During this
process you'll see the light transition to
warm white flashing as it goes through the
association process until it stops flashing
and remains on warm white color.
4. Your light has been added to the LEXI
Mobile App successfully and ready to use.
5. Remember to pair the LED Candles one
by one to the LEXI Mobile App so that
they can be individually controlled
afterwards.
6. To learn more about detail function and
special effect, Please go to
www.lexidevices.com
CHARGING THE LED CANDLE
1. Turn on the switch under the LED
Candle. (You may see the light is flashing
with white color, this is the normal state
when the light has not been paired)
2. Plug-in the LED Candle(s) to the 3.5mm
connector on the Charging Base.
3. Connect the DC 5V 1A adapter, plug-in
the 3.5mm connector to the socket at the
side of Charging Base. During charging
the LED Candle will be light-up with red.
4. Charge for approximately for 6-8 hours.
The LED Candle will turn green when fully
charged.
5. Take out the LED Candle from the
Charging Base, and turn off the candle
light to save power.
6. During charging, make sure the On/Off
switch is located at On position.
7. Durin
g
char
g
in
g
the LED Candle cannot
be controlled by the LEXI Mobile App.
WARNINGS AND CAUTIONS:
- This is an artificial candle. Do not li
g
ht the
LED Candle with fire.
- Keep away from liquids and humidity.
- The product is for indoor use only. Do not
use in wet locations, directly exposed to
water or outdoors.
- This product is not a toy designed to be
played with by children.
- Do not place on hot surfaces.
- Do not be exposed to extreme
temperatures, direct sunlight and
moisture.
- For safety reasons and under the terms of
the warranty, none of the enclosed
devices should be opened.
- Only use the adapter supplied: using a
different adapter can damage the
product.
WARRANTY:
LEXI provided one-year warranty is valid if
the product is used in accordance with
the instructions and for its intended
purpose. Claims will only be accepted on
submission of the original proof of
purchase (invoice, sales slip or receipt)
stating the purchase date, the name of
the dealer and a description of the
product with product ID labeled at the
products.
The LEXI’s warranty lapses if:
a. Anything has been changed, crossed
out, deleted or rendered illegible on the
purchase docket or product description.
b. The failure is caused by damage, faulty
connections or abuse.
c. A defect is caused by extreme
circumstances not inherent to the
product, for example, lighting, flooding,
fire, incorrect use or negligence.
d. The product has been opened or
disassembled.
e. using a different adapter other than we
provided
TROUBLESHOOTING
- Ensure your device is within 45 feet of the
Lexi Portable Hub without obstacles
- Check the On/Off switch is located at
On position (even at charging)
- Make sure the light is charged.
- Confirm your smart phone is paired with
LEXI Portable Hub
- To un-pair the lights turn the light on/off 6
times in quick succession using the LEXI
Mobile App. Afterwards, you'll see a cool
white flashing. ( A warm white will be
flashing at the 5th power cycle which is a
warnin
g
si
g
nal for you. If you don't want to
un-pair it, stop the power cycle. The light
will
g
o back to the last state
)
. Then, re-pair
this light in the User Guide section.
WIRELESS SPECIFICATION:
BLE Frequency: 2402-2480MHz
Wireless communication protocol: IEEE
802.15.4
Channel: 0 -39 channels
ENVIRONMENTAL SPECIFICATION:
Temperature (operation): -5...40°C
Temperature (storage): -25...60°C Relative
humidity: 5-90% non-condensing
CLEANING AND MAINTENANCE:
Do not clean when the product is on and
connected to mains power. To avoid
scratching, the product should only be
cleaned with a soft dry cloth. Do not use
cleaning agents.
PLEASE KEEP THIS PACKAGING FOR FUTURE
REFERENCE AS IT CONTAINS IMPORTANT
INFORMATION.
DISPOSAL OF YOUR OLD PRODUCT:
Your product is designed and
manufactured with high quality materials
and component, contains non-removable
Lithium-Ion battery, which can be
recycled and reused. When this crossed-
out wheeled bin symbol is attached to a
product it means the product is covered
by the European Directive 2002/96/EC.
Please find out for yourself about the local
separate collection system for electrical
and electronic products. Please act
according to your local rules and do not
dispose of your old products with your
normal household waste. The correct
disposal of your old product will help
prevent potential ne
g
ative consequences
for the environment and human health.
FCC WARNING AND CAUTION:
- This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
- Changes or modifications to this unit not
expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
FCC ID : 2ATOT20004
- Shielded Cables must be used with this
unit to ensure complaince with the Class B
FCC limits
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are desi
g
ned
to provide reasonable protection against
harmful interference in a residential
installation.
This equipment generates, uses and can
radiate radio frequency ener
g
y and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turnin
g
the equipment off and on, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.