Instruction manual

English
28
Picture CD
Specications
1. Load a picture CD into the tray. If the disc is identied, the player will display the list of
the folders and photos stored on the CD.
2. Use the / keys to select a folder, then press the ENTER key to start browsing
through the les.
3. Use the / keys to select a photo, then press the ENTER key to launch a slide show
of the pictures.
4. Press to pause and/or resume the slide show.
5. Pres to skip to the next picture, press to return to the previous picture.
6. Use the direction keys to ip or rotate the pictures.
Note:
During the slide show, the numeric keys can also be used to input directly the number
corresponding to a photo.
Press the STOP key at any time to go back to the list of pictures.
Press the DVD MENU key at any time to view thumbnails of the next 9 photos.
During the slide show, press the DISPLAY key to show the le type and photo number
i.e. ‘Track 14/59’.
During the slide show, press the ANGLE key to change how a new picture enters onto
the screen i.e. Right to left, top to bottom etc. There are 17 options to choose from.
GENERAL
Power source AC ~ 100V-240V 50/60Hz
DC 9V 1000mA
Power consumption 10W
External dimensions (LxWxH) 195x158x38.5mm
Operating Temperature 5°C to 35°C (41°F to 95°F)
Operating position Horizontal
Operating humidity 5% to 90%
SYSTEM
Laser Semiconductor laser wave length 650nm
Signal system PAL/NTSC
S/N more than 90db
Dynamic Range more than 90db
OUTPUT
Composite video 1.0V P-P 75ohm negative sync.
Audio output (Analog) 0.5Vrms 600 ohm
AC/DC ADAPTER
Input AC ~ 100V-240V 50/60Hz
Output DC 9V 1000mA