Owner manual

PDF READER

“PDF Reader” (or “JETCET PDF”) is a very simple but complete application that allows you to

open and read your PDF les.

To open a PDF le with “PDF Reader”

1. Double-click the desired PDF le to read it with the “PDF Reader” software.

2. Or, click “Start”, then select “Programs” and click “PDF Reader” to launch the application.

Browse through your folders then double-click the desired PDF le to open it.

Using a USB key:

1. Plug the USB key into one of the USB ports located on the back of the laptop.

2. Double-click the “My Laptop” icon, then double-click the “USB Disk” icon that has

appeared.

3. The les stored on the USB key will be displayed on screen.

Note:

• You can plug a USB key, a USB mouse or a printer in the USB ports located on the back of the

unit (see p.8). Some USB devices may not be compatible.

USB CONNECTION

Note: If a program stops responding, you can use the “Task Manager” system utility to end

the application or switch to another program. Press Ctrl+Alt+Del to launch “Task Manager”,

then select the application you want to exit and click “End Task”. To switch to another

program, click the program that you want to switch to, and then click “Switch To”.

To setup your printer and use it with the Lexibook Laptop

Master:

1. Use a USB cable (not included) to connect the laptop to

your printer. Click “Start”, select “Settings” then click “Control

Panel”.

2. Double-click the “Printers” icon. In the “Printers” window,

double-click the “Add Local Printer” icon to launch the “Add

Printer Wizard” assistant.

3. Follow the instructions displayed on screen. When the set

up is completed, click “Finish”. Your printer is ready for use.

PRINTER SETTINGS