Owner`s manual

ENGLISH

OPERATION (CONTINUED)

TO PROGRAM THE MEMORY (UP TO 20 TRACKS)

While in CD Stop mode, press the PROG.

button; “PROG” and “1” (the program number)

will blink on the LCD display and “01”

(the program number) will blink.

Select the rst track to be played back using

the SKIP/SEARCH

or button, then

press the PROG. button again. Repeat this

step to program additional tracks (up to 20

tracks).

Press the PLAY/PAUSE

button to begin

Programmed playback. Adjust the VOLUME

control as desired.

To skip forward or backward through the

programs, press the SKIP/SEARCH

button.

When the disc is through playing, it will stop.

NOTES:

• Programming is the ability to preselect the order in which a series of tracks will be played.

• Press the REPEAT button twice during Programmed playback to activate Repeat All (all the tracks in

the program will repeat continuously); “REP ALL” is displayed steadily on the LCD screen.

• Press the STOP (

) button to stop the disc before it is nished.

• Press the STOP ( ) button while in the Stop mode to clear the program.