Quick Start Manual

Lexicon 700t

Quick Start Guide

The 700t System Controller is designed to provide simple, fast control of even the most

sophisticated home theater and multimedia presentation systems. By providing a unique

graphical interface, the 700t can replace a clutter of remote controls and sheets of

instructions. An elegant blue and paper-white touchscreen housed in an ergonomic,

rugged ABS enclosure, the 700t is a powerful controller that is incredibly simple to use.

Even the most complicated systems can be operated without peering into manuals and

grasping for tiny buttons on little black plastic remotes.

Software and Files

• All software and files necessary for programming the 700t are available from the

Lexicon web site:

– http://www.lexicon.com/downloads/700t_files_downloads.htm

• Download LexiDraw 3.51--ld35inst(1).exe

• Double click on the file and follow the prompts to install LexiDraw

• Download sample_system.all and place it in the “All” subfolder in the LexiDraw

folder (using default installation the location would be Program Files/LexiDraw/All)

– This .all file can be adapted for your own use, rather than having to make a

program from scratch

• Download Lexicon’s.bml and place it in the “Bitmaps” subfolder

• Download Lexicon’s.cbl and place it in the “Custom” subfolder

• Download master.cml and place it in the “Commands” subfolder

LexiDraw Cable and Communications

• A LexiDraw cable is included with every 700t

• Connect the LexiDraw cable to a serial port on your PC and the RJ-11 port on the 700t

700t Special Functions Page

• The Special Functions page can be accessed two ways

– Ensure 700t back panel switch is off, press and hold your finger on the screen, and

switch unit back on

– Assign a button to this page, allowing it to be accessed just like any other page

• Includes backlight, beeper, contrast and program controls

– Program menu includes IR capture, clear all, computer link, access options, timer

settings

PAGE 1
Lexicon 700t Quick Start Guide The 700t System Controller is designed to provide simple, fast control of even the most sophisticated home theater and multimedia presentation systems. By providing a unique graphical interface, the 700t can replace a clutter of remote controls and sheets of instructions. An elegant blue and paper-white touchscreen housed in an ergonomic, rugged ABS enclosure, the 700t is a powerful controller that is incredibly simple to use.
PAGE 2
LexiDraw Software • The Tools palette is open whenever a .
PAGE 3
Assigning Pages • Assigning a page to a button causes the 700t to go to that page when the button is pressed.
PAGE 4
Repeat the process until all codes for the donor remote are learned and repeat for other remotes not in library • Close IR library manager--library is saved automatically • Codes from the donor remote are now available in master.
PAGE 5
Creating Macros Button Hold and Button Pause • The “Button Hold” command type allows an if-then statement based on the status of whether the button is held down or not – Example--if button is held then complete the following sequence of commands • The “Button Pause” command type tells the macro to pause at that point until the button is released • When finished adding steps to the macro, click “OK” Sending Your Program to the 700t Always save your program before sending it to the 700t or TCM-3 Under Edit/E