User Manual

22
ADJUSTING THE BUFFERS IN MAC OS X
1. Open Cubase LE and go to Devices>Device Setup.
2. Click on
Lexicon Alpha In/Out.
3. Click on the
Control Panel button. You can now select the buffer size. Selecting
lower settings will decrease any monitoring latency. If audio playback has
artifacts (clicking, popping), increase the setting slightly.
4. When you are finished, click Close, then OK and return to your project to test
the results.
5. Repeat this process as many times as necessary until you find a buffer setting
that provides the lowest possible latency without digital artifacts.
Using the Alpha Studio – Adjusting the Buffer Settings