Owner's Manual

MC-12HD Basic Operation
2-23
STATUS MENU LEVEL METERS
Most STATUS menus contain level meters that indicate fluctuating
input levels in the front left (L), center (C), front right (R), surround left
(SL), surround right (SR), surround back (SB) and low frequency effects
(LFE) channels. These level meters indicate input levels for both analog
and digital input sources. For example, the level meters indicate digital
audio input levels when a digital audio source is present.
Different combinations of level meters appear on each STATUS menu,
depending on the source that is present. The SB level meter appears
when a 6.1-channel source is present, or when a 5.1-channel source
is present and the ES DECODING parameter is set to ON.
Level meters appear in combinations of green, yellow and red when
the on-screen display is configured for a blue screen background.
Green indicates low levels, yellow indicates normal levels, and red
indicates high levels and the onset of overload. Level meters appear
in white when the on-screen display is not configured for a blue
screen background.
STATUS MENU DESCRIPTIONS
The table beneath each description lists the default and possible
settings for each parameter.
HDMI STATUS
Provides information about HDMI input sources. VID FMT is the
video format. VERT RATE is the vertical scan rate frequency.
See “Status Menu Parameter Descriptions” on page 2-28 for detailed information.
Parameter Possible Settings
HDMI CONNECTOR 1–6
VID FMT (video format) 480i, 480p, 720p, 1080i, ---
VERT RATE (vertical scan rate) 60Hz, 50Hz, 59.94Hz, ---
AUD IN HDMI, OPTICAL1–6, COAX1–6,
ANALOG, 5.1 ANLG (6–8)
AUDIO FMT DD, DTS, PCM, N/A
CHANNELS 6.1, 5.1, 5.0, 2.1, 2.0, 1.0, N/A
SAMPLE RATE 44.1kHz, 48kHz, 88.2kHz, 96kHz, N/A
HDCP STATUS ACTIVE, INACTIVE, ERROR
HDMI STATUS > S
HDMI CONNECTOR
VID FMT
VERT RATE
AUD IN
AUDIO FMT
CHANNELS
SAMPLE RATE
HDCP STATUS