Owner's Manual

Setup Lexicon
3-10
ASSIGNING HDMI, AUDIO & VIDEO INPUT CONNECTORS (continued)
ANALOG IN ANALOG-1 TO 8, 5.1 ANLG (6-8), LIVE!, NONE
Opens the ANALOG IN menu, to assign an analog audio input
connector to the selected input. An analog audio input connector
must be assigned if no digital audio input connector is assigned.
The appearance of the ANALOG IN menu depends on the configu-
ration of the analog audio input connectors.
• The ANALOG IN menu (A below) appears when the REAR
PANEL CONFIG menu 8 STEREO INPUTS option is selected.
• The ANALOG IN menu (B below) appears when the REAR
PANEL CONFIG menu 5 STEREO & 5.1 ANLG option is
selected.
When no digital audio input connector is assigned, the
MC-12HD automatically sets the:
• MAIN ADV menu INPUT SELECT parameter to ANALOG
• INPUT SELECT menu ZONE2 IN parameter to ANLG
• INPUT SELECT menu RECORD IN parameter to ANLG
Note:
LIVE! cannot be selected until LIVE! CALIBRATION is run. When the
ANALOG IN selection is LIVE!, no other analog inputs (1-8) or digital
inputs can be selected for that input.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
DVD1 ANALOG IN
ANALOG-1
ANALOG-2
ANALOG-3
ANALOG-4
ANALOG-5
ANALOG-6
ANALOG-7
ANALOG-8
NONE
DVD1 ANALOG IN
ANALOG-1
ANALOG-2
ANALOG-3
ANALOG-4
ANALOG-5
5.1 ANLG (6-8)
NONE
A
B
OR
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
TAPE
TUNER
AUX
LIVE!
LIVE!
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
LIVE! CALIBRATION
DVD1 INPUT SETUP
NAME DVD1
HDMI IN HDMI-1
DIGITAL IN HDMI AUDIO
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN NONE
COMPONENT IN 1
2-CH FILM
D 5.1 FILM
FILM
5.1mc 5.1mc FILM
MIC LIVE! MED
MAIN ADVANCED
ZONE2 IN DMIX
RECORD IN DMIX
RECORD ADVANCED
INPUTS
SETUP
DVD1 ANALOG IN