Owner's Manual

Setup Lexicon
3-30
SETTING CROSSOVER POINTS (continued)
SPEAKER SETUP PARAMETERS
The table below indicates the speaker setup parameters for config-
uring all possible settings for speaker setup parameters in the
CUSTOM SETUP and THX SETUP menus.
Speaker setup parameters perform the same function regardless of
the selected speaker setup. When a parameter setting is adjusted on
one menu, the corresponding parameter setting is automatically
adjusted on the other menu. For example, when a THX speaker
setup is selected, the speaker setup parameters on the CUSTOM
SETUP menu are set to THX 80Hz.
* These parameters cannot be adjusted on the THX SETUP menu.
† When the THX ULTRA2 SUB parameter is set to OFF, the BGC parameter is not available (N/A).
SPEAKERSSETUP SET CROSSOVERS CUSTOM SETUP
or
SPEAKERSSETUP
SET CROSSOVERS THX SETUP
Parameter
CUSTOM SETUP Menu THX SETUP Menu
Default Setting Possible Setting Default Setting Possible Settings
FRONT L/R* 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz THX 80Hz THX 80Hz
CENTER* 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE THX 80Hz THX 80Hz
SIDE L/R* 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE THX 80Hz THX 80Hz
REAR L/R 80Hz FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE THX 80Hz THX 80Hz, NONE
SUB L/R* MONO MONO, STEREO, NONE MONO MONO
SUB XOVER* 80Hz FULL, 30Hz to 120Hz, THX 80Hz THX 80Hz THX 80Hz
LFE* OFF ON, OFF ON ON
THX ULTRA2 SUB OFF ON, OFF OFF ON, OFF
BGC N/A† ON, OFF N/A† ON, OFF
ASA APART APART, CLOSE, TOGETHER APART APART, CLOSE, TOGETHER