Owner's Manual

5-9
MUSIC
Designed for playback of matrix-encoded digital stereo music
sources.
Derives six channels when both side and rear speakers are
present (rear channels will be in parallel). Derives five channels
when only side or rear speakers are present. The subwoofer
channel is generated through bass management in the MC-4.
Option/
Parameter
OUTPUT LEVELS
CUSTOM
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for
detailed descriptions of these options and parameters.
Please note the following about DTS Neo:6 listening mode
activation:
The DTS Neo:6 listening modes cannot be assigned as the
preferred listening mode for 2-channel sources. However,
when the 2-CH parameter is set to USE LAST, the MC-4 will
automatically activate a DTS Neo:6 listening mode if a DTS
Neo:6 listening mode was activated the last time a 2-channel
source was present.
The MC-4 will not automatically activate the DTS Neo:6 listening
modes unless a 44.1kHz or 48kHz PCM digital source is present.
The DTS Neo:6 listening modes are not available with 88.2kHz
or 96kHz, Dolby Digital or analog sources.
The DTS Neo:6 MUSIC listening mode can be activated with
the front panel or remote control Mode and buttons.
The DTS Neo:6 CIN listening mode can also be activated with
the remote control DTS button when a 2-channel input
source is present.
R
CIN
Designed for playback of matrix-encoded digital stereo film
sources.
Derives six channels when both side and rear speakers are
present (rear channels will be in parallel). Derives five channels
when only side or rear speakers are present. The subwoofer
channel is generated through bass management in the MC-4.
Option/
Parameter
OUTPUT LEVELS
CUSTOM
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for
detailed descriptions of these options and parameters.
R
MODE ADJUST
MC-4
MODE ADJUST DTS neo:6 MUSIC
MODE ADJUST DTS neo:6 CIN
R