Owner's Manual

5-23
Note:
The table below is not applicable to the DTS-ES
THX, DTS THX ULTRA2 and DTS THX MUSIC listen-
ing modes.
DECODING
The table below indicates the conditions in which DTS-ES
decoding is engaged.
• DTS-ES decoding is engaged when the ES DECODING
parameter is set to ON or the ES DECODING parameter is set
to AUTO and a 5.1-channel matrix-encoded or 6.1-channel
discrete-encoded DTS-ES source is detected.
• DTS-ES decoding is not engaged when the ES DECODING
parameter is set to OFF or the ES DECODING parameter is set
to AUTO and a 5.1-channel DTS source is detected.
• Listening mode names differ depending on the encoding
present in the input source, the ES DECODING parameter
setting and the speaker setup.
– DTS-ES listening modes are available when DTS-ES
decoding is engaged.
– DTS listening modes are available when DTS-ES decoding
is not engaged.
– DTS-ES listening modes cannot be activated unless both
side and rear speakers are present.
MODE ADJUST
MC-4
6.1-Channel
Discrete-Encoded DTS-ES
5.1-Channel
Matrix-Encoded DTS-ES
5.1-Channel DTS
DTS DTS-ES DTS-ES
ES DECODING: AUTO
DTS-ES DTS-ES DTS-ES
ES DECODING: ON
DTS DTS
DTS
ES DECODING: OFF
Parameter
Setting
Input
Source