Owner's Manual

5-26
MUSIC
• Designed for playback of 5.1-channel DTS music sources.
•The DTS THX MUSIC listening mode cannot be activated
unless side and rear speakers are present.
• ASA processing is applied to signals sent to the rear speakers.
See “ASA” on page 3-32 for more information.
• Recommended for home theaters with THX-certified speaker
setups.
Option/ Default Possible
Parameter Setting Settings
LFE MIX +0.0dB –10.0dB to +0.0dB
OUTPUT LEVELS — —
CUSTOM — —
See “Listening Mode Menu Option & Parameter Descriptions” on page 5-29 for
detailed descriptions of these options and parameters.
Note:
The DTS THX MUSIC listening mode can only be
activated with the front panel or remote control
Mode  and  buttons.
The table at the bottom of the previous page indicates the
conditions in which THX Ultra2 and DTS-ES decoding are
engaged.
• THX Ultra2 decoding is engaged when the ES DECODING
parameter is set to OFF or the ES DECODING parameter is set
to AUTO and a 5.1-channel DTS source is detected.
• DTS-ES decoding is engaged when the ES DECODING
parameter is set to ON or the ES DECODING parameter is set
to AUTO and a 5.1-channel matrix-encoded or 6.1-channel
discrete-encoded DTS-ES source is detected.
• Listening mode name differs depending on the encoding
present in the input source, the ES DECODING parameter
setting and the speaker setup.
– The DTS THX ULTRA2 listening mode is available when
THX Ultra2 decoding is engaged.
– The DTS-ES THX listening mode is available when DTS-ES
decoding is engaged.
–The DTS THX ULTRA2 and DTS(-ES) THX listening modes
cannot be activated unless side and rear speakers are
present.
MODE ADJUST
Lexicon
MODE ADJUST

MUSIC