Owner's Manual

Basic Operation

MC-4

2-7

MAIN MENU

The MAIN MENU shown to the right represents

the beginning of the menu structure. It can

be used to open the three main menu

branches: MODE ADJUST, AUDIO CONTROLS and SETUP. See

sections 3, 4 and 5 for information about these menu branches.

MENU ITEM SELECTION

The remote control Menu arrows must be used to select menu

items.

Navigation Function(s)Arrow

• When a menu is open, pressing the Menu  arrow selects the highlighted menu item, which opens another menu,

opens a parameter drop-down menu or selects the highlighted parameter setting.

• When no menus are open, pressing the Menu  arrow opens the MAIN MENU.

• When a menu is open, pressing the Menu  arrow closes the menu and, in most cases, opens the previous menu.

Subsequent presses continue to close the current menu and open the previous menu until the MAIN MENU

is closed. When the MAIN MENU is closed, the menu structure is also closed.

• When no menus are open, pressing the Menu  arrow performs no function.

• When a parameter drop-down menu is open, pressing the Menu  arrow selects the current setting and closes the

drop-down menu.

• When a menu is open, pressing the Menu  and  arrows scrolls upward () and downward () through menu

items. The highlighted menu item appears on the front panel display. All menu items appear on the on-screen display.

A scroll bar appears on the right side of the on-screen display when menu items exceed the on-screen display top

and bottom margins. The cursor automatically wraps to the next menu item when the first or last menu item is

passed.









MAIN MENU

MODE ADJUST

AUDIO CONTROLS

SETUP

Note:

In certain cases, menu item selection instructions

differ. These instances are noted throughout this

user guide.

To select a menu item on the open menu:

1. Press the remote control Menu  and  arrows to highlight

the desired menu item.

2. Press the Menu  arrow to select the highlighted item. If an

option is selected, another menu will open. If a parameter is

selected, a parameter drop-down menu will open.