Owner's Manual

SETUP
MC-4
3-9
ANLG IN LVL
Opens the ANLG IN LVL menu, which adjusts 2-channel analog
audio input levels for the selected input. Despite attempts at
standardization, analog audio sources have a wide range of levels.
To compensate for this, the MC-4 allows independent input level
adjustment for each of its stereo analog audio input connectors.
Input level adjustment is not available for either of the
5.1-channel analog audio input connectors.
Note:
Adjustments made on the ANLG IN LVL menu are
applied to the stereo analog audio input connector
assigned for the selected input. When another stereo
analog audio input connector is assigned, these
adjustments are automatically applied to the new
connector.
ANLG IN LVL

DVD1

INPUTS

SETUP
AUTO ON, OFF
Provides automatic adjustment of 2-channel analog audio input
levels. When ON, the MC-4 automatically monitors and optimizes
input levels. When the input signal is too high, the MC-4 quickly
decreases input levels to avoid overload. When the input signal is
too low, the MC-4 slowly increases input levels to maximize signal-
to-noise ratio and dynamic range.
When the AUTO parameter is OFF, the MC-4 does not provide
automatic adjustment of 2-channel analog audio input levels.
Rather, input levels must be adjusted with the ANLG IN LVL menu
MANUAL parameter.
AUTO

ANLG IN LVL

DVD1

INPUTS

SETUP
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
ADVANCED

ANLG IN LVL AUTO
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
  
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
INPUTS DVD1
DVD1 ANLG IN LVL
AUTO ON
MANUAL +0dB
AUTO GAIN +0.0dB
L C R SL SR SB LFE
X X X XXX X
0
–6
–15
–30
–45
dB
AUTO ON

ON
OFF