Owner's Manual

SETUP
Lexicon
3-18
INPUT SELECT DIGITAL, ANALOG, AUTO
Controls the interaction of the digital and analog audio input
connectors assigned for the selected input. The INPUT SETUP
menu can be used to assign one digital and one analog audio
input connector for the selected input. See “DIGITAL IN” on page
3-7 and “ANALOG IN” on page 3-8 for more information.
Pressing and holding the S1 button while pressing and releasing
the 7/5 button adjusts the INPUT SELECT parameter, cycling
through the DIGITAL, ANALOG and AUTO settings.
The table shown on the next page describes INPUT SELECT
parameter settings.
INPUT SELECT

ADVANCED

DVD1

INPUTS

SETUP
Note:
When the INPUT SELECT parameter is set to AUTO,
the MC-4 will not select the assigned analog audio
input connector when a valid digital audio input
source is present. Some DVD and CD players output
digital signals (data) when the player is paused or
stopped or when the player is powered on and the
disc drawer is empty. If this occurs, the MC-4 auto-
matically selects the assigned digital audio input
connector.
Configuring Advanced Settings (continued)
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
MAIN ADVANCED

ADVANCED
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP
  
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
INPUT SETUP
DVD1
DVD2
SAT
VCR
TV
CD
TUNER
AUX
INPUTS DVD1
DVD1 ADVANCED
INPUT SELECT DIGITAL
2-CH ANLG BYP OFF
S-VIDEO 16:9 AUTO
S-VIDEO OSD 4:3 ON
COMPONENT OSD OFF

DIGITAL
ANALOG
AUTO
INPUT SELECT DIGITAL