Owner's Manual

SETUP
MC-4
3-27
CENTER FULL, 30Hz–120Hz, THX 80Hz, NONE
Opens the CENTER SPEAKER menu, which can be used to select a
crossover point for the audio output connector labeled Center.
When set to FULL, the MC-4 sends a full-range audio signal to
this connector. Otherwise, the MC-4 activates a crossover point at
the selected setting. Choose the setting closest to the low-
frequency rating of the center loudspeaker. When set to NONE,
the MC-4 redirects center-channel signals to the audio output
connectors labeled Front L/R.
CENTER

CUSTOM SETUP

SPEAKERS

SETUP
Note:
When the CENTER parameter is set to NONE,
center-channel signals will not be redirected if the
5.1a BYPASS listening mode is activated. Use the
associated DVD-A/SACD player to configure the
speaker setup to to redirect center-channel signals.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP

SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS

SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L
M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP

CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUBWOOFER 40Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
CENTER 60Hz

CENTER SPEAKER
FULL
30Hz
40Hz
50Hz
60Hz
70Hz
80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE