Owner's Manual

SETUP
Lexicon
3-28
SIDE L/R FULL, 30Hz–120Hz, THX 80Hz, NONE
Opens the SIDE L/R SPEAKERS menu, which can be used to select
a crossover point for the audio output connectors labeled Side
L/R. When set to FULL, the MC-4 sends a full-range audio signal
to these connectors. Otherwise, the MC-4 activates a crossover
point at the selected setting. Choose the setting closest to the
low-frequency rating of the side (surround) loudspeakers.
When set to NONE, the MC-4 redirects side channel signals to
the audio output connectors labeled Rear L/R. If the CUSTOM
SETUP menu REAR L/R parameter is also set to NONE, the MC-4
redirects surround channel signals to the audio output connectors
labeled Front L/R.
SIDE L/R

CUSTOM SETUP

SPEAKERS

SETUP
Note:
When the SIDE L/R parameter is set to NONE, Dolby
Digital Surround EX, THX Ultra2, THX Surround EX
and DTS-ES decoding are not available.
Custom Speaker Setups (continued)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP

SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L
M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS

CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUBWOOFER 40Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
SIDE L/R 60Hz
 
SIDE L/R SPEAKERS
FULL
30Hz
40Hz
50Hz
60Hz
70Hz
80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE