Owner's Manual

SETUP
MC-4
3-29
REAR L/R FULL, 30Hz–120Hz, THX 80Hz, NONE
Opens the REAR L/R SPEAKERS menu, which can be used to select
a crossover point for the audio output connectors labeled Rear
L/R. When set to FULL, the MC-4 sends a full-range audio signal
to these connectors. Otherwise, the MC-4 activates a crossover
point at the selected setting. Choose the setting closest to the
low-frequency rating of the rear loudspeakers.
When set to NONE, the MC-4 redirects rear channel signals to
the audio output connectors labeled Side L/R. If the CUSTOM
SETUP menu SIDE L/R parameter is also set to NONE, the MC-4
redirects surround channel signals to the audio output connectors
labeled Front L/R.
REAR L/R

CUSTOM SETUP

SPEAKERS

SETUP
Note:
When the REAR L/R parameter is set to NONE,
• Dolby Digital Surround EX, THX Ultra2, THX
Surround EX and DTS-ES decoding are not
available and
•the ASA parameter is not available.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP

SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS

SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L
M
SUB
R
C
SL
SR
RL
RR
CUSTOM SETUP

CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R 60Hz
REAR L/R 60Hz
SUBWOOFER 40Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
REAR L/R 60Hz

REAR L/R SPEAKERS
FULL
30Hz
40Hz
50Hz
60Hz
70Hz
80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE