Owner's Manual

SETUP
MC-4
3-33
THX SPEAKER SETUPS
When the SPEAKER SETUP menu THX SETUP option is selected,
the THX SPEAKER SETUP message appears on the on-screen and
front panel displays. When this message appears, press the Menu
 arrow to open the THX SETUP menu and configure the audio
output connectors for a THX speaker setup or press the Menu 
arrow to close the message without configuring the audio output
connectors for a THX speaker setup. THX-certified loudspeakers
are recommended for a THX speaker setup.
When the THX SPEAKER SETUP menu opens, the audio output
connectors are automatically configured for a THX speaker setup.
The MC-4 ignores all CUSTOM SETUP menu parameter settings
and applies a THX 80Hz crossover point with a 12dB per-octave
filter to all output connectors, except the audio output connector
labeled Subwoofer, which is assigned a 24dB per-octave filter.
THX SETUP

SPEAKERS

SETUP
Note:
A THX speaker setup is not required to activate THX
listening modes.
Default Possible
Parameter Setting Setting(s)
FRONT L/R* THX 80Hz THX 80Hz
CENTER* THX 80Hz THX 80Hz
SIDE L/R* THX 80Hz THX 80Hz
REAR L/R THX 80Hz THX 80Hz, NONE
SUBWOOFER* THX 80Hz THX 80Hz
THX ULTRA2 SUB OFF ON, OFF
BGC N/A ON, OFF
ASA APART TOGETHER, CLOSE, APART
*These parameters cannot be adjusted.
When a THX speaker setup is selected, all CUSTOM
SETUP menu parameters are automatically set to
THX 80Hz. However, a custom speaker setup can
still be configured with the CUSTOM SETUP menu.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SETUP

SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SPEAKERS



SPEAKER SETUP
CUSTOM SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
40Hz 40Hz
40Hz 60Hz 60Hz
60Hz 60Hz
60Hz
L
M
SUB
R
C
SL
SR
RL
RR
THX SETUP
THX SPEAKER SETUP
!CAUTION!
PRESSING THE V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A THX
SPEAKER
CONFIGURATION
THX SETUP
FRONT L/R* THX 80Hz
CENTER* THX 80Hz
SIDE L/R* THX 80Hz
REAR L/R THX 80Hz
SUBWOOFER* THX 80Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
* These parameters cannot be
adjusted.