User manual

31
your previous programs and settings.
To archive the MX200, click Device and
select Backup. A warning will appear,
advising you that a full Backup may take
a few minutes, and asking whether you
wish to proceed. To cancel without creat-
ing a Backup archive, click Cancel or
close the dialog box. To proceed, click
OK. A progress bar appears at the bot-
tom of the MX-Edit screen, indicating that
a Bulk Dump is in process. When all the
MX200 data is received, a Save dialog
box appears. The default file name is
the current day and date (e.g. Backup
Wednesday, April 27, 2005 ) with the file
extension .m2a (MX200 Archive file). Click
Save to store the Backup Archive file.
To restore a saved archive, click Device
and select Restore. When prompted,
select an MX200 archive file, and click
Open. MX-Edit then sends the MX200
archive to your MX200, replacing all the
data in the hardware with the archived
data.
Note: It is a good idea to create a new
Backup archive file anytime you plan to
restore the MX200 from a previous archive
session.
The MX-Edit Editor/Librarian - Windows