User Manual



NOTE: Though the term “impulse” is used in this manual, these algorithms are NOT

convolution reverbs!

Room Scale

Is used to change the size of a room impulse.

Bass Xover

Controls the frequency of a ﬁlter that is applied to the room impulse. It works in conjunction

with Bass Boost.

Bass Boost

Can boost or cut the signal below the Bass Xover value.

On the right side of the fader ﬁeld, you will see a pair of drop-down menus and a button. The

upper menu allows you to select a category of room impulses. The lower menu allows you to

select an impulse from the active category. The bottom button is used to switch the impulse

from Normal to Reversed, a rather signiﬁcant effect.