RV-5 Receiver User Guide
IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Lexicon, “Logic 7”, and the L7 logo are registered trademarks of Harman International Industries, Inc. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS-ES | Neo:6” are registered trademarks of DTS, Inc. and “96/24” is a trademark of DTS, Inc. “Faroudja” and “DCDi by Faroudja” are trademarks of Genesis Microchip, Inc. “HD-DVD” is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).
Introduction Lexicon DOCUMENTATION CONVENTIONS This document contains general safety, installation and operation instructions for the RV-5 Receiver. It is important to read this user guide before attempting to use the product. Pay particular attention to safety instructions. Note: This manual is not intended as a general reference guide for home theater systems.
Introduction RV-5 Table of Contents Documentation Conventions........................................................ ii Getting Started About the RV-5.......................................................................... 1-2 Product Registration .................................................................. 1-2 Highlights ................................................................................. 1-2 What’s in the Box ......................................................................
Introduction Tuner, PC, & Dock Controls Tuner, PC, and Dock Overview ..................................................5-2 AM/FM Radio Tuner ..................................................................5-2 Zone 2 Tuner ........................................................................ 5-2 Tuner Activation and Display ................................................. 5-2 Tuner Controls ...................................................................... 5-3 PC Controls ..........................
1 Getting Started About the RV-5........................................................................... 1-2 Product Registration ................................................................... 1-2 Highlights .................................................................................. 1-2 What’s in the Box ....................................................................... 1-3 Available Options .......................................................................
Getting Started Lexicon ABOUT THE RV-5 HIGHLIGHTS Thank you for purchasing the RV-5 Receiver, a multi-faceted audio and video preamplifier with built-in processing. Married to that is a high-current, 7-channel power amplifier capable of driving a wide array of loudspeakers and a built-in FM/AM tuner. In addition, the RV-5 can accommodate a pair of HDMI source devices and can connect directly to a PC via USB, enabling the control and playback of streaming audio files.
Getting Started RV-5 WHAT’S IN THE BOX The following items are included with the RV-5 Receiver: of the RV-5 to access and control your iPod.
Getting Started INSTALLATION CONSIDERATIONS The RV-5 requires special care during installation to ensure optimal performance. Pay particular attention to the instructions below and to other precautions that appear throughout this user guide. DO install the RV-5 on a solid, flat, level surface such as a table or shelf. DO select a dry, well-ventilated location out of direct sunlight. Lexicon REMOTE CONTROL BATTERY INSTALLATION The remote control requires four AAA batteries.
2 Basic Operation Front Panel Overview ................................................................. 2-2 Rear Panel Overview................................................................... 2-5 Amplifier Overview..................................................................... 2-8 Making Connections With the Amplifier Output........................................ 2-8 Utilizing Spare Channels............................................................................
Basic Operation Lexicon FRONT PANEL OVERVIEW The RV-5 is shown below. The numbers in the front panel illustration correspond with the numbered items in the text. 2 1 11 10 3 4 9 8 1. Front Panel Display 7. Zone 2 Off Button 2. IR Receiver 8. Main Zone Off Button 3. Volume Knob 9. Mute Button 4. Tuner/iPod Control Buttons 10. Mode Buttons 5. Main Zone Input Selection Buttons 11. On/Standby Button 6.
RV-5 1 FRONT PANEL DISPLAY Use the front panel 2-line display to view the current input source, input type, listening mode, and volume level. The 2 x 20 character display also functions as a display for messages and menus, one line at a time. Basic Operation 2. While holding down the Zone 2 input button, rotate the volume knob clockwise to increase the volume or counter-clockwise to decrease the volume.
Basic Operation pressing a Zone 2 input selection button activates the corresponding input in Zone 2. When the RV-5 is in Standby, pressing a Zone 2 input selection button powers on the RV-5, selects the input in Zone 2, and turns off the Main Zone. 7 ZONE 2 OFF BUTTON Deactivates Zone 2. When Zone 2 is off, the Zone 2 OFF button on the front panel lights red. 8 MAIN ZONE OFF BUTTON Deactivates the Main Zone. When the Main Zone is off, the Main Zone OFF button on the front panel lights red.
Basic Operation Lexicon REAR PANEL OVERVIEW The RV-5 rear panel is shown below. The numbers in the rear panel illustrations correspond with the numbered items in the text. 2 3 4 5 6 7 8 9 11 10 12 13 14 1 21 20 17 19 18 17 16 1. Microphone Input Connector 8. RS-232 Connector 15. Power Switch 2. 8-CH Analog Audio Input Connector Array 9. S-Video/Composite Input Connectors 16. AC Input Connector 10. S-Video/Composite Ouput Connectors 17. Amplifier Outputs 3.
Basic Operation CAUTION! Never make or break connections to the RV-5 unless the RV-5 and all associated components are powered off. Lexicon 5 ZONE 2 AUDIO OUTPUT CONNECTORS Provide preamplifier audio outputs for Zone 2. 6 USB CONNECTOR 1 MICROPHONE INPUT CONNECTOR Provides a microphone input for system calibration. The microphone input is only for use with the supplied microphone during the systemcalibration process. See Section 3: Setup for more information on system setup and calibration.
Basic Operation RV-5 9 S-VIDEO/COMPOSITE INPUT CONNECTORS 15 POWER SWITCH Provide the S-Video & Composite analog video inputs. Four composite video connectors labeled 1 to 4 and four S-Video connectors labeled 1 to 4 are available. Use the Power Switch to connect or disconnect power from the AC Input connector to the RV-5 Receiver. When the RV-5 is powered on, the front panel Standby button or remote control ON & OFF buttons can be used to activate and deactivate standby mode.
Basic Operation 19 DOCK CONNECTOR Provides an interface for an iPod, which can then be accessed through the RV-5. To use this feature, the D-1 Dock option must be installed to the rear panel DOCK connector. With a compatible iPod connected to the RV-5, selecting the DOCK input allows you to play audio files from the iPod. You can view and navigate through the iPod menus using the RV-5 remote control or front panel controls.
Basic Operation RV-5 TUNER, PC, & DOCK OVERVIEW REMOTE CONTROL OVERVIEW The Tuner, PC, & Dock inputs are the only “hard-wired” inputs in the RV-5 Receiver. Unlike the other inputs, these three have very specific audio-only functionality. The RV-5 Receiver remote control provides full operation of the RV-5 including commands, such as menu navigation, that are not available from the front panel. It is also designed to provide control for the entire home theater system.
Basic Operation Lexicon RV-5 MENU OVERVIEW MENU NAVIGATION When the remote control touch screen is in the “LEX”, “TUNER”, or “ZONE 2” menu layers, pressing MENU or SELECT on the RV-5 remote control accesses the menu controls for the RV-5 Receiver. The MAIN MENU is the root directory of the RV-5 menu structure and has three branches: AUDIO CONTROLS, VIDEO STATUS, and SETUP. Use the remote control arrow buttons to navigate the RV-5 menu structure, shown in detail in Appendix B.
Basic Operation RV-5 REMOTE CONTROL BUTTONS 1. Touch Screen (component and function buttons) 2. MAIN remote control touch screen menu 1 3. OFF 9 2 4. VOLUME (+/-) 5. MUTE 6. MENU 3 10 7. SELECT & Navigation (left, right, up, & down) 4 11 8. Number Keypad & Enter 5 12 10. ON 6 13 11. CHANNEL 7 14 13. GUIDE & INFO 15 14. EXIT 9. LIGHT (back light for the remote control) 12. Previous Channel 15.
Basic Operation Lexicon MENU OPTIONS REMOTE CONTROL LIGHT BUTTON Selecting a menu option can open another menu within the menu structure. For example, selecting SETUP from the MAIN MENU opens the SETUP menu. The remote control is fully back lit, making it very useful in low-light conditions. Press the LIGHT button on the right side of the remote to back light all of the buttons and the LCD touch screen. To turn off the back light, press the LIGHT button again or wait.
Basic Operation RV-5 MAIN 1 2 3 4 5 6 7 8 Note: The number call-outs on the figure above correlate with the numbers in the adjoining table. LEX PAGE2 LEX PAGE3 LEX PAGE4 1 Menu Name MAIN* Menu Name - LEX Menu Name - LEX Menu Name - LEX (iPod controls) Menu Name - LEX (PC controls) 2 LEX Enters the Lexicon Lexicon RV-5 menu layer L7 Selects the Logic 7 listening mode family EQ Toggles the Auto EQ parameter between ON & OFF.
Basic Operation Lexicon MAIN* 11 12 13 14 15 16 17 18 19 Note: The number call-outs on the figure above correlate with the numbers in the adjoining table.
Basic Operation RV-5 MAIN* 20 MENU Enters OSD menu 21 EXIT Exits OSD menu 22 21 20 23 22 25 24 27 26 28 23 24 25 26 27 28 Note: The number call-outs on the figure above correlate with the numbers in the adjoining table. LEX PAGE1-4 TUNER PAGE 1-3 ZONE 2 PAGE 1-3 (unused) REWIND SELECT Arrows Enters OSD menu, While in OSD menu, selects menu items Used for OSD menu navigation If not in the OSD menu structure, no function.
Basic Operation Lexicon MAIN* 30 LEX PAGE1-4 TUNER PAGE 1-3 ZONE 2 PAGE 1-3 29 1 Main Zone HD input Zone 2 HD input 30 2 Main Zone DVD input Zone 2 DVD input 31 3 Main Zone Game input Zone 2 Game input 32 4 Main Zone Sat input Zone 2 Sat input 33 5 Main Zone Cable input Zone 2 Cable input 34 6 Main Zone DVR input Zone 2 DVR input 35 7 Main Zone CD input Zone 2 CD input 36 8 Main Zone Dock input Zone 2 Dock input 29 31 32 34 37 9 Main Zone PC input Zone 2 PC inpu
3 Setup Setup ......................................................................................... 3-2 Display Setup ............................................................................. 3-3 Speaker/EQ Setup ...................................................................... 3-5 Rear Amp .................................................................................................. 3-6 Manual .................................................................................................
Setup Lexicon SETUP SURROUND CONFIGURATION SETUP Selecting SETUP from the MAIN MENU opens the SETUP menu. MAIN MENU AUDIO CONTROLS VIDEO STATUS SETUP SETUP DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS Opens the SURROUND CONFIG menu, which is used to customize the listening modes that are available for the currently selected input. See the “Surround Configuration” section found later in this chapter for more information.
Setup RV-5 DISPLAY SETUP Selecting the SETUP menu DISPLAY SETUP option opens the DISPLAY SETUP menu, which is used to customize the OSD and front panel display, and setup other display-related features.
Setup Lexicon MENU TIME OUT SETUP DISPLAY SETUP NONE, 30, 40, 50, 60 SECONDS ON-SCREEN DISPLAY MENU TIME OUT Selects the MENU TIME OUT parameter from the On-Screen Display (OSD) menu. This parameter identifies the length of time before the OSD menu times out and can be set from 30 to 60 seconds in ten-second increments. If NONE is selected, then the OSD will not turn off automatically. CAUTION! The NONE selection should only be used with caution.
Setup RV-5 SPEAKER/EQ SETUP Select the SPEAKER/EQ SETUP menu to configure the Main Zone audio output connectors for the desired speaker setup. The Main Zone includes eight audio output connectors labeled Front L/R, Center, Subwoofer, Side L/R and Rear L/R.
Setup Lexicon REAR AMP SETUP SPEAKER/EQ SETUP REAR AMP, ZONE 2 REAR AMP Selects the REAR AMP parameter, which identifies how the rear amplifier is utilized. The amplifier can drive the rear speakers in the Main Zone or the Zone 2 speakers. To maintain 7.
Setup RV-5 FULL AUTOCAL SETUP SPEAKER/EQ SETUP CAUTION! FULL AUTOCAL Selects the FULL AUTOCAL procedure, which automatically sets the speaker distances, cross-over points, and output levels, as well as performing system equalization adjustments. Note: The Full or Semi Autocal settings that are saved to the Preset locations include the system equalization adjustment values.
Setup The microphone should be held within two feet of the speaker baffle as a test tone is sent to the speaker. The Subwoofer test is done in two parts. The user is instructed to hold the microphone to the left of the primary listening position and then to the right of the primary listening position. Two test tones are sent out to all connected subwoofers during each of the two test phases. Two tones are sent to ensure that subwoofers with auto power settings are active during the procedure.
Setup RV-5 MANUAL SPEAKER SETUP Selecting the SETUP menu SPEAKER/EQ SETUP menu MANUAL option opens the MANUAL menu, which is used to manually set the speaker distances, cross-over points, and output levels. SETUP SPEAKER/EQ SETUP MANUAL SPEAKERS SPEAKER DISTANCES OUTPUT LEVELS AUTO SETTINGS SETUP SPEAKER/EQ SETUP SPEAKERS SPEAKER DISTANCES 1 SPEAKER DISTANCES 2 AUTO SETTINGS: OFF UNITS: FEET FRONT LEFT: 0.0 ft CENTER: 0.0 ft FRONT RIGHT: 0.0 ft SIDE RIGHT: 0.0 ft REAR RIGHT: 0.0 ft REAR LEFT: 0.
Setup Lexicon SPEAKERS MENU SETUP SPEAKER/EQ SETUP MANUAL SPEAKERS Selecting the MANUAL SETUP menu SPEAKERS option opens the SPEAKERS menu, which assigns independent cross-over points for each Main Zone audio output connector. Front cross-over selections affect the Sub Mode parameter options. Manual Speaker Setup Considerations: • • Select the cross-over point closest to the -3dB low frequency rating of the associated speakers.
Setup RV-5 REAR/Z2 L/R FULL, 40 to 120Hz, NONE Allows the manual selection of a cross-over point for the Main Zone audio output connectors labeled REAR/Z2 L/R. Available selections include NONE, FULL, 120 Hz, 100 Hz, and 80 Hz to 40 Hz in 10 Hz increments. • Select FULL to send a full-range signal to the Rear/Zone2 L/R speakers. Otherwise, select the cross-over point closest to the -3dB low-frequency rating of the Rear/Zone2 L/R speakers.
Setup Lexicon The distances for each speaker - Front Left, Center, Front Right, Side Right, Rear Right, Rear Left, Side Left, and Subwoofers - can be set individually. Note: When the speaker distance for the Front Left speaker is adjusted above 20.0 feet from the shortest speaker distance, all speaker distances will move in conjunction from the 20.2-feet parameter point. When the Front Left speaker is adjusted to 20.2 feet, all other speaker distances that are set to 0 feet will now move to 0.2 feet.
Setup RV-5 To activate the Test Tone: 1. Press the Menu or Select button to enter the Menu structure. 2. Select Setup from the Main menu. 3. Select Speaker/EQ Setup. 4. Select Manual. 5. Select Output Levels. 6. Press the remote control Tone parameter. and 7. Press the remote control SELECT or the Test Tone parameter. arrows to highlight the Test arrow button to select 8. Press the remote control arrow to select manual test tones.
Setup Lexicon INPUT SETUP Selecting the SETUP menu INPUT SETUP option opens the INPUT SETUP menu, a two-screen menu which sets up the input type and name, the digital and analog inputs for both audio and video, the listening mode, and other advanced input settings.
Setup RV-5 To Customize the Name of the Selected Input: 11. Select the input and enter the Input Setup menu. 12. Select the Name parameter. Note that a blinking square appears in the first letter position. 13. Using the and arrows, scroll through the letter list until you find the first desired letter. The letter list is arranged with Uppercase letters > lowercase letters > numbers > symbols. The letters are listed in alphabetical order and the numbers in numerical order.
Setup Lexicon Conv Only - Does not apply any video enhancement or processing to the incoming video signal, but outputs the signal in one of the following ways, depending on the input source. • • • A standard-definition (480i or 576i) analog signal (composite, S-video, or component) is converted so that it is available as an HDMI signal at its input resolution, as well as at the standard S-video, composite, or component analog video outputs.
Setup RV-5 DIG AUDIO SETUP INPUT SETUP DIG AUDIO Selects the DIG AUDIO parameter, which assigns one of the rear panel digital audio input connectors to the current input. Available selections include NONE, Optical 1-4, Coaxial 1-4, and HDMI 1-2. The HDMI Audio & Video inputs, HDMI 1 & HDMI 2, are mutually exclusive inputs - only one input is available at a time for each input location.
Setup Lexicon DEFAULT SUR SETUP INPUT SETUP STANDARD, USE LAST DEFAULT SUR SETUP Identifies the Default Surround Mode that is activated when a digital source is selected. The STANDARD parameter activates the “standard” decoder of the source input. The USE LAST selection allows the RV-5 software to “remember” the last used listening mode for any given input source. Once selected, that mode will always be active on the corresponding input until another listening mode is selected.
Setup RV-5 Note: If you have 5.1-channel or 7.1-channel ANALOG AUDIO assigned to an Input using the BYPASS listening mode, only the Front Left and Front Right channels will be sent to Zone 2 OUT with the ANALOG setting. In this condition, DOWN MIX is not available. • If the Zone 2 input is NOT the same as the Main Zone input, but the Zone 2 ANLG AUDIO IN parameter is set to any of the six stereo analog input connectors, then Zone 2 will output the independent analog audio for that input.
Setup Lexicon ADVANCED VIDEO Selecting the SETUP menu INPUT SETUP menu ADVANCED VIDEO option opens the ADVANCED VIDEO menu, a two-screen menu which provides user-adjustable controls for sharpness, noise reduction, brightness, and other video fine-tuning. Note: Most of the Advanced Video parameters are only available when the V-Process parameter is set to FAROUDJA.
Setup RV-5 Most of the following Advanced Video parameters are simple ON/OFF toggle switches that apply to each input independently.
Setup Lexicon FILM EDIT DETECT SETUP INPUT SETUP OFF, ON ADVANCED VIDEO FILM EDIT DETECT Applies additional processing when film-based material is detected so that any disruption in the frame sequence of film-based material due to video edits or overlay of video text over film is compensated for by processing, before artifacts such as feathering may appear.
Setup RV-5 LISTENING MODES The RV-5 has a large selection of listening modes to choose from. The list of available listening modes is broken into two parts - the Mode Family and the Mode. The available listening modes vary depending upon the Mode Family selections, the input setup, and the incoming audio signal. The RV-5 features the ability to turn off selected listening mode families so that those options do not appear in the list of available listening modes.
Setup Lexicon AVAILABLE LISTENING MODES The following table provides a complete listing of the listening modes available for each of the incoming audio or video formats currently available. Shaded cells indicate that there are no available modes in that Mode Family for that specific incoming data stream. Note: The table identifies all of the possible formats, but depending upon the Input setup and the Surround Configuration of the RV-5, all of these modes may not be available for selection.
Setup RV-5 Incoming DOLBY Datastream Dolby Dolby Digital 1.0 VS 2-SP REF & WIDE DOLBY DIGITAL DOLBY D STEREO Dolby Digital 2.0 PLIIx Film, Music, & Game PLII Film, Music, & Game Pro Logic VS 2-SP REF & WIDE VS 3-SP REF & WIDE VS 4-SP WIDE VS 5-SP WIDE DOLBY DIGITAL Dolby Digital 4.1 PLIIx Film & Music Digital EX DOLBY DIGITAL DOLBY D STEREO VS 2-SP REF & WIDE VS 4-SP WIDE Dolby Digital 5.
Setup Incoming DTS Datastream Lexicon Dolby DTS 5.1 MATRIX DTS 96/24 DTS 6.1 DISCRETE DTS+PLIIx Film & Music* *These modes are only available when a DTS source is playing and the Dolby Mode Family button is pressed on the remote.
Setup RV-5 LISTENING MODE DESCRIPTIONS The following table provides a brief description of each listening mode. Logic 7 Film Logic 7 Music A proprietary Lexicon technology, Logic 7 is an advanced mode that extracts the maximum surround information from either surround-encoded programs or conventional stereo material. Film 7.1 and Music 7.1 are tailored specifically for use with rear speakers, while Film 5.1 and Music 5.1 are specifically formatted for use without rear speakers.
Setup Lexicon DTS Neo:6 Cinema DTS Neo:6 Music These two modes are available when any analog source is playing to create a three-channel, five-channel, or six-channel surround presentation from conventional Matrix-encoded and traditional Stereo sources. Select the Cinema version of the Neo:6 when a program with any type of Matrix surround encoding is present. Select the Music version of Neo:6 for optimal processing when a non-encoded, two-channel stereo program is being played.
Setup RV-5 5.1-CHANNEL & 7.1-CHANNEL DIRECT INPUTS DTS & DOLBY STATUS DISPLAYS There are four listening modes available for use with surround sources such as DVD-Audio, SACD, HD-DVD, or Blue-ray players. These listening modes are for use when the RV-5 8-channel direct inputs are in use. We recommend you use these listening modes under the following conditions: The upper right-hand corner of the front panel 2-line display may indicate status information regarding the incoming source.
Setup Lexicon SURROUND CONFIGURATION Selecting the SETUP menu SURROUND CONFIG option opens the Surround Configuration menu, which is used to customize the list of available listening modes that can be applied to incoming signals. Each Mode Family has a subset of available listening modes that can be turned off. If the listening mode is set to OFF, then the applicable listening modes in that family are not available for selection from the mode buttons.
Setup RV-5 LOGIC 7 DEFAULT SETUP SURROUND CONFIG OFF, ON LOGIC 7 DEFAULT Allows the user to choose Logic 7 as the default surround mode for all incoming audio signals. If this parameter is OFF, then the RV-5 selects the native format of the incoming signal as the default listening mode. If set to ON, then all incoming audio signals are defaulted to the Logic 7 listening modes. Setting the Logic 7 Default to ON does not prevent other listening modes from being available through the Mode buttons.
Setup Lexicon DOLBY CONFIGURATION Selecting the SETUP menu DOLBY CONFIG option opens the Dolby Configuration menu, which is used to configure the Dolby surround modes for optimum performance.
Setup RV-5 MUTE LEVELS POWER ON SETTINGS Selecting the SETUP menu MUTE LEVELS option opens the Mute Levels menu, which is used to adjust the mute levels of both the Main Zone and Zone 2 audio outputs. Selecting the SETUP menu POWER ON SETTINGS option opens the Power On Settings menu, which provides user preferences to the Power On Volume and Dock Auto Power settings.
Setup 3-34 Lexicon
4 Audio Controls & Video Status Audio Controls ............................................................................4-2 Video Status ...............................................................................
Audio Controls & Video Status Lexicon AUDIO CONTROLS Selecting AUDIO CONTROLS opens the AUDIO CONTROLS menu. All of the Audio Controls interact with the AUTOCAL settings, except for the Audio Status parameter.
Audio Controls & Video Status RV-5 To load a different saved EQ Preset into the system: 1. Decide which saved Preset location you want to load. 2. Select ACTIVE PS from the EQ PRESET menu. 3. Use the to load. 4. Press the or cursors to select the Preset location you want Note: When the Tone Controls are OFF, the incoming audio datastream is stereo analog, and the Mode Family is set to STEREO, four different listening modes are available: 7CH STEREO, 5CH STEREO, 2CH STEREO, and 2CH BYPASS.
Audio Controls & Video Status AUDIO STATUS AUDIO CONTROLS AUDIO STATUS INPUT: HD+ NAME: CONNECTOR: ANALOG 3 AUDIO: - - MODE FAMILY: LOGIC 7 MODE: MUSIC 5.1 The AUDIO STATUS menu is an information-only menu identifying the current audio status of the RV-5. • INPUT identifies the currently selected input. • NAME identifies the customer-chosen name, if any, for the currently selected input. • CONNECTOR identifies the current audio connector in use.
5 Tuner, PC, & Dock Controls Tuner, PC, and Dock Overview ...................................................5-2 AM/FM Radio Tuner....................................................................5-2 Zone 2 Tuner ............................................................................................ 5-2 Tuner Activation and Display .................................................................... 5-2 Tuner Controls....................................................................................
Tuner, PC, & Dock Controls TUNER, PC, AND DOCK OVERVIEW Unlike the other nine inputs of the RV-5 Receiver, the Tuner, PC, and Dock inputs are NOT interchangeable. These three inputs have specific audio-only functionality that is exclusive to these individual inputs. The TUNER input is for use with the internal AM/FM radio tuner and cannot be used in conjunction with any of the rear panel audio inputs. The Tuner controls and features are discussed in the following sections of this chapter.
Tuner, PC, & Dock Controls RV-5 Note: The Tuner Input setup displays Digital Audio as NONE, Analog Audio as TUNER, and the Dig/Anlg Auto parameter is dashed out. These three parameters cannot be changed for the Tuner Input. Once the Tuner is activated, the TUNER input button under the Main Zone heading on the front panel is lit with a blue LED; the Zone 2 TUNER input button lights with an amber LED.
Tuner, PC, & Dock Controls SAVE Stores a radio station into a preset location. To Save a Radio Station to a Preset Location: 1. Tune to the station frequency and band that you want to save. 2. Press SAVE. A blinking preset number or dashed lines are displayed. Note: If nothing is pressed after the SAVE button, the preset will blink for several seconds before the save function is cancelled. 3. Press Preset +/- or Tune +/- to scroll through the presets. 4.
Tuner, PC, & Dock Controls RV-5 USB jack on a computer or hub that has not been previously connected to the RV-5, you will see a series of pop-up messages from Windows to indicate that the computer is configuring itself for the new device. Since the RV-5 provides a number of different functions, you may see the “Found New Hardware” message up to four times, one each for “A/V Receiver,” “Compatible Device,” “Audio Receiver”, and “Human Interface Device.
Tuner, PC, & Dock Controls DOCK FUNCTIONALITY The optional D-1 iPod Docking Station allows you to enter a new world of listening enjoyment made possible by combining the storage capacity and playback flexibility of an iPod® (not included) with the sonic power of your RV-5 Receiver. Operation is easy, you can use your RV-5 remote control or the front panel buttons to access and control your iPod selections.
Tuner, PC, & Dock Controls RV-5 To remove the factory installed insert, hold the Dock with one hand as you grab the edges of the insert in the Dock with your other hand, then pull straight up. Use the following as a guide to determine which insert is correct for your iPod model: DOCKING THE iPOD • For any iPod with a color screen, including all iPod photo models, use the insert with “COLOR/PHOTO” on the back. This insert is already installed in the Dock at the factory.
Tuner, PC, & Dock Controls Lexicon As the menus on the iPod are scrolled through, the top left side indicates the menu item selected and the bottom left side indicates the menu items as they are scrolled through, as shown: PLAYLIST 4 ANLG DINNER MIX -39dB Note: The allotted space for iPod navigation descriptions is 14 characters. If a menu item is longer than this limitation, the displayed name is simply cut off at the 14-character point.
RV-5 • • • AUTO/MAN mimics the MENU button on the iPod. The MENU button backs out of the menu structure, one level at a time, each time it is pressed. SAVE mimics the SELECT button on the iPod. The SELECT button acts as a play button at the song level. The select button drills deeper into the menu structure, one level at a time, each time it’s pressed. ST/MON and FM/AM both mimic the Play/Pause ( || ) control of the iPod. If the playlist is not active, pressing this option starts the playlist.
Tuner, PC, & Dock Controls 5-10 Lexicon
6 Troubleshooting & Maintenance Troubleshooting......................................................................... 6-2 RV-5 Error Messages ................................................................... 6-7 Video Error Messages ................................................................................ 6-7 Autocal Error Messages ............................................................................. 6-8 Video Resolutions Table............................................................
Troubleshooting & Maintenance Lexicon TROUBLESHOOTING The RV-5 is powered on, but there is no audio. The RV-5 does not power on. 1. Make sure that the source device is powered on, playing audio, and set to the right output connector. 1. Make sure the rear panel power switch is set to the ON position. 2. Attempt to power on the RV-5 with the front panel Standby button and remote control ON button. 3.
RV-5 Troubleshooting & Maintenance A humming sound is present in the audio. In the SEMI AUTOCAL Test, the Far Field Test keeps failing. 1. If a cable TV connection is present, disconnect the cable from the wall outlet. If this eliminates the humming sound, a ground loop isolation device is required. Contact your dealer or cable provider for assistance. 1. Ensure that the microphone is placed in your preferred seating location. 2. Disconnect components one at a time to isolate the problem.
Troubleshooting & Maintenance The RV-5 is powered on, but there is no video. 1. Examine the video cables – particularly the S-Video cables – to ensure a good connection to the associated component. 2. Check the INPUT SETUP menu VIDEO IN parameter to ensure the appropriate video connector is assigned to the selected input. 3. Set the V-PROCESS parameter to BYPASS. This setting doesn’t apply any video processing and outputs the signal in the same resolution and format as the incoming signal. Lexicon 2.
RV-5 Troubleshooting & Maintenance VIDEO IN is set to NONE, but the monitor has a video error, or is showing a blue screen. issues don’t need a power cycle to re-sync correctly. We suggest that you try the following: When the VIDEO IN parameter is set to NONE, the RV-5 outputs a blue screen at 480i resolution. This blue screen cannot be disabled. If the monitor does not support 480i resolution, the monitor may display an error message. 1. Enter the OSD menu and then exit out again.
Troubleshooting & Maintenance Lexicon Using the PC input, the remote control commands on page 4 of the LEX menu, page 3 of the TUNER menu, and page 2 of the ZONE 2 menu do not work. The iPod’s front panel display and controls do not operate when the iPod is docked and the DOCK input is selected as the RV-5’s active input. 1. Make sure that the computer is properly connected to the USB input of the RV-5 Receiver.
Troubleshooting & Maintenance RV-5 RV-5 ERROR MESSAGES VIDEO FORMAT OUTPUT ERROR RV-5 error messages are displayed on the OSD when certain error conditions exist. This section explains the meaning of these error messages and how to fix each problem. VIDEO ERROR MESSAGES The following error messages apply specifically to video issues. VIDEO PROCESS ERROR This error message will display when the incoming datastream is at a higher resolution than the resolution of the VIDEO OUT p a r a m e t e r.
Troubleshooting & Maintenance CHANGE MONITOR MESSAGE CHANGE MONITOR TO ANALOG IN This error message flashes on the 2 -l i n e O S D a n d f r o n t p a n e l displays when an analog signal is being sent to an HDMI monitor. Lexicon FAR FIELD ERROR This error message will display when the microphone does not detect sound from a speaker that has a cross-over setting other than “NONE” during the Far Field Test.
Troubleshooting & Maintenance RV-5 SUBWOOFER CAL ERROR This error message will display w h e n t h e S u b w o of e r t e s t h a s failed. Typically, this failure occurs because the microphone is not in the proper position or the volume setting is too low. To correct the problem, check the microphone position, verify the subwoofer cables are connected properly, verify that the volume level is correct, and repeat the test.
Troubleshooting & Maintenance Lexicon VIDEO RESOLUTIONS TABLE The RV-5 Receiver is designed to allow flexibility in the selection of video output resolutions. However, there are restrictions on what resolutions can be made available due to incoming signal limitations. If you are not getting the expected resolution options for your video monitor, it is possible that there is an incompatability between the input setup selections and the incoming signal.
Troubleshooting & Maintenance RV-5 INPUT OUTPUT Video Mode Source HDMI Format HDMI S-Video, Composite Analog HDMI S-Video Composite Note 480i 480i 480i** 480i** 480i** 1 480p 480p 480p** - - 1 720p 720p 720p** - - 1 1080i 1080i 1080i** - - 1 480i 480i - - 2, 3 480p 480p - - 2, 3 480i Component Analog Component 480p BYPASS 720p 720p 720p - - 2, 3 1080i 1080i 1080i - - 2, 3 S-480i 480i 480i** 480i (from S) 480i (from S) 2, 3, 4 C-480i 480i
Troubleshooting & Maintenance Lexicon ROUTINE MAINTENANCE RESTORING FACTORY DEFAULT SETTINGS The bulleted items below describe routine maintenance that should be performed on a periodic basis. It is possible to reset the RV-5 Receiver to its factory settings. However, doing so will permanently delete any user-defined or manually-entered settings, including parameters such as speaker setup changes, input names, and tuner presets. • • Clean the RV-5 exterior surface with a soft, lint-free cloth.
A Appendix Specifications ............................................................................. A-2 Declaration of Conformity..........................................................
Appendix A Lexicon SPECIFICATIONS Inputs Outputs HDMI (Version 1.1) 2 HDMI Type A, 19-pin connectors HDMI (Version 1.
Appendix A RV-5 Component Video Performance Audio Performance Compatibility 3-channel (Y, Pr, Pb), format-independent A/D conversion 24-bit, 96kHz, dual-bit ΔΣ Impedance 75Ω D/A conversion 24-bit, 44.1 to 192kHz, multi-bit ΔΣ Insertion Loss <3dB Input Sensitivity 400mV for Analog 1 to 6, and 400mV for 8-ch input Bandwidth >100MHz Input Impedance 98.
Appendix A Lexicon DECLARATION OF CONFORMITY General Power Requirements 120V, 60Hz, 1300W, IEC detachable power cord (supplied) 230V, 50Hz, 1300W, IEC detachable power cords (supplied for EU & UK) Power Consumption 4.82W at Power on, idle 1235W at rated power output (7-channels driven) Dimensions • • • • Height (with feet): 6.6 inches (168 mm) Height (without feet): 6 inches (153 mm) Width: 17.3 inches (440 mm) Depth*: 15.6 inches (397 mm) Weight • Net Weight: 39.7 lb (18 kg) • Gross Weight: 55.
B Appendix Main Menu: Audio Controls ........................................................B-2 Main Menu: Video Status ............................................................B-2 Main Menu: Setup ......................................................................B-3 Setup Menu: Display Setup ....................................................................... B-4 Setup Menu: Surround Config .................................................................. B-4 Setup Menu: Speaker/EQ Setup ......
Appendix B Lexicon MAIN MENU: AUDIO CONTROLS MAIN MENU AUDIO CONTROLS VIDEO STATUS SETUP AUDIO CONTROLS AUTO EQ: ON EQ PRESET EQ ADJUST TONE CONTROLS: OFF BASS: 0dB TREBLE: 0dB AUDIO STATUS EQ ADJUST HF SHELF: 0dB AUDIO STATUS INPUT: HD+ NAME: CONNECTOR: ANALOG 3 AUDIO: - - MODE FAMILY: LOGIC 7 MODE: MUSIC 5.
Appendix B RV-5 MAIN MENU: SETUP MAIN MENU AUDIO CONTROLS VIDEO STATUS SETUP SETUP DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS DOLBY CONFIGURATION DISPLAY SETUP CONNECTION: HDMI/DVI HDMI AUDIO OUT: NO ON-SCREEN DISPLAY FRONT PANEL DISPLAY continued on page B-4 SPEAKER/EQ SETUP REAR AMP: REAR SPK MANUAL SEMI AUTOCAL FULL AUTOCAL continued on page B-5 INPUT SETUP 1 INPUT: HD NAME: ________ VIDEO IN: HDMI 1 V-PROCESS: FAROUDJA VIDEO OUT: AUTO DIG
Appendix B Lexicon SETUP MENU: DISPLAY SETUP MAIN MENU AUDIO CONTROLS VIDEO STATUS SETUP SETUP DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS DISPLAY SETUP CONNECTION: HDMI/DVI HDMI AUDIO OUT: NO ON-SCREEN DISPLAY FRONT PANEL DISPLAY ON-SCREEN DISPLAY 2-LINE OSD: 3s MENU TIME OUT: 30s FRONT PANEL DISPLAY BRIGHTNESS: FULL TIME OUT: NONE SETUP MENU: SURROUND CONFIG MAIN MENU AUDIO CONTROLS VIDEO STATUS SETUP SETUP DISPLAY SETUP SPEAKER/EQ SETUP INP
Appendix B RV-5 SETUP MENU: SPEAKER/EQ SETUP MAIN MENU AUDIO CONTROLS VIDEO STATUS SETUP SETUP DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS SPEAKER/EQ SETUP REAR AMP: REAR SPK MANUAL SEMI AUTOCAL FULL AUTOCAL SPEAKERS AUTO SETTINGS: OFF FRONT L/R: 80Hz CENTER: 80Hz SIDE L/R: 80Hz REAR/Z2 L/R: 80Hz SUB/LFE LPF: 80Hz SUBWOOFERS: 1 SUB HPF: 20Hz SUB MODE: NORMAL PERFORMS SEMI-AUTOMATIC CALIBRATION PERFORMS FULL AUTOMATIC CALIBRATION MANUAL SPEAKER
Appendix B Lexicon SETUP MENU: INPUT SETUP MAIN MENU AUDIO CONTROLS VIDEO STATUS SETUP SETUP DISPLAY SETUP SPEAKER/EQ SETUP INPUT SETUP SURROUND CONFIG DOLBY CONFIG MUTE LEVELS POWER ON SETTINGS INPUT SETUP 1 INPUT: HD* NAME: ________ VIDEO IN: HDMI 1* V-PROCESS: FAROUDJA VIDEO OUT: AUTO DIG AUDIO: HDMI 1* ANLG AUDIO: NONE* DIG/ANLG AUTO: ON INPUT SETUP 2 MODE FAMILY: LOGIC 7 MODE: FILM 5.
C Appendix Remote Control Programming ................................................... C-2 Remote Control Light Button .................................................................... C-2 Transmitting Icon...................................................................................... C-2 Setting Up the Remote Control................................................................. C-3 Lock Feature .............................................................................................
Appendix C Lexicon REMOTE CONTROL PROGRAMMING The RV-5 rem o te co ntr o l i s a v er y p o we r f ul an d flex ible pre-programmed and learning remote control, designed to be the universal controller of your home theater system. The RV-5 remote control can operate up to 14 home entertainment and home automation components by using the remote control’s pre-programmed code library, or by letting the remote control “learn” from another remote, one button at a time.
RV-5 SETTING UP THE REMOTE CONTROL The RV-5 remote control can be set up so that it controls all of the components of your home entertainment system, making remote access simple and efficient. There are two ways to set up the remote control: • Pre-programmed Codes - Allows you to set up all of the buttons at once, by entering the pre-programmed 3-digit codes of the component manufacturers. • Button Learning - Allows you to transfer functions from other remotes, both old and new, one button at a time.
Appendix C Note: The DOWN and UP buttons on the touch screen can be used to scroll the code number one digit at a time. If you hold your finger over the UP or DOWN button, the code number will scroll until your finger is removed. 8. When the component turns off, press the ON button on the remote to turn the component back on. Test several functions to ensure that the component responds correctly to the remote commands.
Appendix C RV-5 1. Line up the RV-5 remote control with the other remote control, head-to-head, one or two inches apart. 2. On the RV-5 remote control, press and hold the MAIN and ENT (Enter) buttons at the same time. After about 3 seconds, “SETUP” is displayed in the Menu name area at the top of the LCD touch screen. This is the Setup mode of the remote control. menu page arrows can be taught. The menu name will change to “READY” and the menu page area indicates the button that you pressed. 6.
Appendix C Lexicon ADVANCED CUSTOMIZING TOOLS • Learned functions override any existing pre-programmed functions on the remote control. • All buttons can be taught except for the menu page arrows, MAIN button, and LIGHT button on the side of the remote. Once the basic setup to your remote is complete, you can use the advanced features to further customize your RV-5 remote control.
Appendix C RV-5 Back light Time Out: Adjusting the Touch Screen Contrast: The back light feature lights the touch screen area and illuminates the buttons whenever the LIGHT button is pressed. The amount of time the back light remains on before timing out can be adjusted to your preferences. Follow the instructions below to change the back light time out setting. You can make the text in the touch screen area darker by pressing the MAIN and cursor buttons at the same time.
Appendix C 6. Now touch the text that you want to edit. The first letter will start flashing with a black box. 50 #523/2 "UTTON DELETES ALL TEXT ,%&4 #523/2 -OVES BLINKING CHARACTER LEFT $/7. #523/2 DELETES THE CURRENTLY BLINKING CHARACTER 2)'(4 #523/2 -OVES BLINKING CHARACTER RIGHT ",).+).' #(!2!#4%2 Lexicon 7. Changing the text requires the dual use of the number keypad and the up/down/ left/right cursors.
RV-5 Favorite Channel Access: To access the Favorite Channel listings, press the MAIN button to display page 1 of the Main menu. Touch the FAV (Favorite Channel) button on the touch screen. A list of favorite TV & cable stations is now displayed. Each option can be set to instantly select the channel on your TV. There are five pages of eight favorite channels for a total of forty buttons. Favorite Channel Setup: Before the Favorite Channels can be selected, they must be setup for your home theater.
Appendix C Macro Power ON Setup: Any of the touch screen menu options can be setup as Macro buttons. Follow the instructions below to setup a macro button that will power ON several components at once. 1. On the remote control, press and hold the MAIN and ENT (Enter) buttons at the same time. After about 3 seconds, “SETUP” is displayed in the Menu name area at the top of the LCD touch screen. This is the Setup mode of the remote control.
RV-5 switch components without triggering the macro. Only holding down the component button will trigger the macro. To set the “Press & Hold” macro, enter a delay as the first step of the macro by pressing the PAUSE (||) button. Each press adds half a second to the delay. The amount of delay determines how long the user must hold down the button before the macro is sent.
Appendix C Lexicon the remote control is no longer in Setup mode. If this occurs, you will need to repeat this step to re-enter the Setup mode. • CH - Channel Up, Channel Down, Previous Channel, and Channel (0 to 9 Number Keypad) buttons 3. Touch the PUNCH option to setup the system volume control. The menu name changes to “PUNCH” and the bottom of the screen flashes “SELECT BUTTON”. A new screen now displays with the options: VOL, PLAY, CH, and VOD.
Appendix C RV-5 Note: The TEXT option allows the text of each menu to be changed. Refer to the “Customizing the Touch Screen” procedure, found earlier in this chapter, for instructions. 3. Touch the PAGE option. The menu name changes to “PAGE” and the component options are displayed. The bottom of the touch screen flashes “SELECT”. 4. Navigate to the menu and page that you want to HIDE or ADD. When you select a page, the top of the screen indicates whether you want to “ADD?” or “HIDE?” the displayed page.
Appendix C RESTORING FACTORY DEFAULT SETTINGS If you’re afraid you’ve accidently overwritten functions that you wanted, or want a “clean-slate” to start from, the remote control can be reset to its factory default settings. Follow the instructions below to restore the factory default settings. Note: Restoring the Factory Default Settings will ERASE all customized features, including renamed components, learned buttons, and macros. 1.
Appendix C RV-5 USING THE 3-DIGIT CODE LIBRARY The following pages contain the code library for the 3-digit pre-programmed manufacturers’ codes for most home theater equipment. The code library is divided into categories, such as TV and VCR. Each category may include several different types of components.
Appendix C Lexicon AUDIO AUDIO Manufacturer Codes Manufacturer Codes EAD EIGER ELAN 466 149 057 290 MCINTOSH MCS MERIDIAN MITSUBISHI MONDIAL MYRYAD NAD NAKAMICHI NEC NIRO NILES ONKYO OPTIMUS OUTLAW PANASONIC PARASOUND PHAST PHILIPS PIONEER POLKAUDIO PRIMARE PROCEED RCA REALISTIC REQUEST REVOX ROTEL RUSSOUND SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHERWOOD SONY 238 286 076 012 013 100 204 242 243 042 043 081 112 157 158 276 293 113 186 283 478 479 111 172 183 244 245 287 176 343 403 017 046 064 079
Appendix C RV-5 AUDIO CABLE/WEB TV Manufacturer Codes Manufacturer SOUNDMATTERS SOUNDSTREAM SSI SUMO SUNFIRE TAEKWANG TEAC TECHNICS THETA DIGITAL TOSHIBA WARDS YAMAHA 375 084 088 068 171 344 345 346 494 138 005 019 049 111 212 217 122 176 177 178 193 200 219 257 262 136 060 087 198 278 180 026 067 089 169 173 205 232 253 264 274 285 332 373 432 433 143 210 ABC 003 004 039 042 046 053 103 ADELPHIA 043 074 ZENITH AUDIO-XM Radios & Tuners BOSE 170 532 DELPHI 415 515 FANFARE 352 KENWOOD 550 POLKAU
Appendix C Lexicon CABLE/WEB TV Manufacturer GOLDEN CHANNEL CABLE/WEB TV Codes Manufacturer Codes 030 SERVICE ELECTRIC HAMLIN 049 050 055 SHAW 074 HITACHI 055 103 SIGECOM 043 INSIGHT 074 SONY 096 108 JERROLD 002 003 004 008 009 010 069 074 103 SPRUCER 047 078 MAGNAVOX 010 012 064 079 094 095 STARCOM 002 004 008 009 MASSILLON 074 STARGATE 008 030 097 104 MEDIA ONE 107 SUSQUEHANNA 043 074 MEDICOM 074 TIME WARNER 043 074 MEMOREX 052 TOCOM 039 040 056 MITSUBISHI 102
Appendix C RV-5 CD Manufacturer CD Codes Manufacturer Codes ADCOM 042 062 KOSS 061 AIWA 059 065 088 089 105 122 170 187 KRELL 241 AKAI 085 195 202 KYOCERA 005 AMC 231 232 LOTTE 102 AMEND 118 LUXMAN 011 028 070 076 249 252 ARCAM 238 LXI 059 AUDIO ACCESS 119 147 MAGNAVOX 044 107 AUDIO EASE 165 MARANTZ 027 041 044 051 077 107 209 246 AUDIO TECHNICA 046 MCINTOSH 212 247 BSR 037 057 MCS 014 073 092 CALIFORNIA AUDIO 008 103 MEMOREX 010 CAPETRONIC 063 MISSION 04
Appendix C Lexicon CD Manufacturer DVD Manufacturer Codes 042 050 051 102 181 182 187 AIWA 146 ROTEL 044 107 161 178 250 ALPINE 098 SAE 044 107 APEX DIGITAL 087 111 112 115 116 SANSUI 044 069 107 125 128 171 190 ARCAM 122 SANYO 050 CAMBRIDGE AUDIO 215 SCOTT 069 102 CARY AUDIO DESIGN 174 SHARP 026 031 051 066 CLASSE 167 SHERWOOD 003 019 051 096 112 115 119 166 COBY 258 SIGNATURE 033 DENON 007 080 173 SONY 048 081 097 126 133 164 177 225 226 FUNAI 143 SOUNDESIGN 25
Appendix C RV-5 DVD Manufacturer Codes DVD NAKAMICHI 103 Manufacturer Codes ONKYO 035 076 180 OPPO 266 DVD-TV/DVD Combos PANASONIC 021 042 138 139 144 150 AIWA PHILIPS 066 083 095 105 166 FUNAI 143 PIONEER 023 092 099 107 108 131 SAMSUNG 165 POLAROID 233 234 237 SYLVANIA 143 PRIMARE 193 194 SYMPHONIC 143 PROCEED 086 TOSHIBA 130 146 PROSCAN 026 027 RCA 026 027 DVD-TV/DVD/VCR Combos RJTECH 269 MAGNAVOX 143 ROTEL 204 PANASONIC 144 SAMSUNG 056 070 119 137 159
Appendix C Lexicon DVD Manufacturer LD Codes DVD-DVD Recorders Manufacturer Codes DENON 206 207 FUNAI 120 GATEWAY 175 KENWOOD 013 152 GO VIDEO 220 221 222 MAGNAVOX 032 121 ILO 268 MARANTZ 211 121 279 MITSUBISHI LITEON 265 NAD 121 PANASONIC 139 OPTIMUS 013 049 SENSORY SCIENCE 222 PANASONIC 113 SONY 191 PHILIPS 032 TOSHIBA 188 PIONEER 106 117 121 RADIO SHACK 120 RCA 002 REALISTIC 049 KISS DVR-PVR/TIVO Manufacturer DISH ECHOSTAR HUGHES HUMAX JVC PHILIPS RCA R
Appendix C RV-5 SAT Manufacturer TAPE Codes CABLEVISION/VOOM 148 DIRECTV 173 ECHOSTAR/DISH EXPRESSVU GENERAL ELECTRIC GENERAL INSTRUMENT GOI HITACHI HTS HUGHES JVC LG MAGNAVOX MEMOREX MITSUBISHI MOTOROLA NEXT LEVEL PANASONIC PANSAT PAYSAT PHILIPS PROSCAN RADIO SHACK RCA SAMSUNG SKY SONY STAR CHOICE TOSHIBA UNIDEN ZENITH 122 167 168 122 106 150 151 148 122 139 140 122 068 108 117 154 161 162 165 166 122 170 136 136 068 154 148 148 142 160 172 136 068 108 117 136 152 153 154 156 106 150 151 148 106 1
Appendix C Lexicon TV Manufacturer TV Codes Manufacturer Codes ADMIRAL 072 081 160 161 EIKI 187 ADVENT 247 ELECTROHOME 024 076 143 196 AKAI 146 197 248 EMERSON 004 005 028 043 047 048 050 051 076 096 143 151 A MARK 112 143 AMPRO 073 157 167 183 EPSON 324 AMSTRAD 052 ESA 323 ANAM 043 054 056 080 112 131 AOC 004 058 112 197 APEX DIGITAL 006 310 FISHER FUJITSU FUNAI 007 057 198 246 346 028 043 AUDIOVOX 076 273 FUTURETECH 043 BARCO 233 GATEWAY 242 268 BLAUPUNKT 088
Appendix C RV-5 TV Manufacturer TV Codes Manufacturer Codes LOEWE 164 RADIO SHACK 004 019 043 127 143 LOGIK 072 RCA LUXMAN 004 LXI 007 015 052 081 160 164 166 REALISTIC 007 019 043 047 MAGNAVOX 003 004 022 059 060 061 063 064 094 127 160 164 197 ROCTEC 186 226 239 273 RUNCO 073 157 168 169 178 179 180 181 182 183 340 MARANTZ 164 184 197 SAMPO 004 058 197 202 MATSUI 164 SAMSUNG 004 050 089 101 105 127 143 160 228 229 258 MAXENT 242 SANYO 007 020 053 057 082 166 187 MEMOR
Appendix C Lexicon TV Manufacturer TERA VCR Codes Manufacturer 172 DBX DYNATECH ELECTROHOME EMERSON TMK 004 TOSHIBA 007 015 030 040 062 101 138 325 TOTEVISION 143 UNIVERSAL 008 009 VIDEO CONCEPTS 146 VIDIKRON 174 184 188 192 340 VIDTECH 004 VIEWSONIC 242 VIZIO 386 387 WARDS 004 008 009 019 028 034 060 061 063 064 072 074 143 164 WESTING HOUSE 076 280 WINBOOK 339 YAMAHA 004 197 YORK 004 YUPITERU 043 ZENITH 072 073 095 103 157 183 243 284 ZONDA 112 VCR Manufacturer AIW
Appendix C RV-5 VCR Manufacturer VCR Codes Manufacturer Codes ORION 025 TECHNICS PANASONIC 066 070 074 083 133 140 145 157 163 167 TEKNIKA 019 031 034 101 PENTAX 013 020 031 063 THOMAS 034 PHILCO 031 034 067 TMK 006 PHILIPS 031 034 054 067 071 101 156 TOSHIBA 008 013 042 047 059 079 081 082 112 131 PILOT 101 TOTEVISION 040 101 PIONEER 013 021 048 UNITECH 040 PORTLAND 108 VECTOR RESEARCH 012 PULSAR 072 VICTOR 048 QUARTZ 002 014 VIDEO CONCEPTS 012 034 046 141 QUASA
Appendix C Lexicon AUX Manufacturer AUX Codes Manufacturer Codes 3M 152 POLKAUDIO AIWA 164 RUSSOUND APPLE 401 SCIENTIFIC ATLANTA 156 163 ARCHER 155 SIMA 082 AURORA MULTIMEDIA 220 SOLO ELECTRONICS 207 AUTON 191 SOMFY 078 079 BOSE 409 SONY 164 165 166 261 262 CELADON 221 STARCOM 153 CRESTRON 213 214 215 216 217 218 TURBOSCAN 167 DELL 261 262 VELODYNE 203 DMX 156 XANTECH 168 169 170 171 172 188 189 DRAPER SCREEN 204 DREAMVISION 097 AUX-Media PC Controls DWIN
D Appendix Installation Worksheet .............................................................. D-2 3-Digit Preprogrammed Codes Worksheet .................................
Appendix D Lexicon INSTALLATION WORKSHEET INPUT SETUP HD DVD GAME SAT CABLE DVR CD DOCK PC TUNER AUX1 DIG AUDIO NONE USB NONE ANLG AUDIO DOCK NONE TUNER N/A N/A N/A NAME VIDEO IN V-PROCESS VIDEO OUT HDMI LINK DIG/ANLG AUTO MODE FAMILY** MODE** DEFAULT SUR** A/D SAMPLE RATE A/V SYNC DELAY TRIGGER 2 ZONE2 OUT** ADVANCED VIDEO INPUT TYPE SHARPNESS NOISE REDUCTION X-COLOR SUPPRESS DCDi INTERPOL FILM DETECTION FILM EDIT DETECTION FLESHTONE NR D-2 AUX2
Appendix D RV-5 INPUT SETUP HD DVD GAME SAT CABLE DVR CD DOCK PC TUNER AUX1 AUX2 ADVANCED VIDEO (CONTINUED) COMPNT ENHANCE BRIGHTNESS CONTRAST COLOR SPEAKER SETUP REAR AMP**: _______ AUTO SETTING FRONT LEFT ** CENTER FRONT RIGHT SIDE LEFT SIDE RIGHT REAR LEFT REAR RIGHT SUB/ SUB/ LFE LPF LFE HPF SUB 1 SUB 2 CROSS-OVER POINTS** DISTANCES (UNITS: ___)** OUTPUT LEVELS “ALL” INPUT** HD INPUT DVD INPUT GAME INPUT SAT INPUT CABLE INPUT DVR INPUT CD INPUT DOCK INPUT PC INPUT TUNER INPUT AUX
Appendix D Lexicon SURROUND CONFIGURATION LOGIC 7 DEFAULT** DTS** DTS 96/24 DTS + NEO:6 DTS-ES MATRIX DTS-ES DISCRETE LOGIC 7 STEREO DOWN MIX DOLBY 2.0** DOLBY PLII DOLBY PLIIx DOLBY VIRTUAL LOGIC 7 DOLBY MULTI-CHANNEL** DOLBY VIRTUAL PCM 44.
Appendix D RV-5 R/P CONNECTIONS ANALOG AUDIO DIGITAL AUDIO DOCK INPUT DOCK NONE PC INPUT NONE USB TUNER INPUT TUNER NONE ANALOG VIDEO DIGITAL VIDEO HD INPUT DVD INPUT GAME INPUT SAT INPUT CABLE INPUT DVR INPUT CD INPUT AUX 1 INPUT AUX 2 INPUT TUNER PRESET FREQ / BAND TUNER PRESET FREQ / BAND TUNER PRESET FREQ / BAND TUNER PRESET 01 09 17 25 02 10 18 26 03 11 19 27 04 12 20 28 05 13 21 29 06 14 22 30 07 15 23 08 16 24 FREQ / BAND D-5
Appendix D Lexicon 3-DIGIT PRE-PROGRAMMED CODES WORKSHEET COMPONENT AUDIO DVD CD SAT TV VCR CABLE AUX LIGHT TAPE PHONO TV2 VCR2 DVR LDP XM RADIO IPOD X-BOX D-6 MANUFACTURER CODE(S) USED
Index Numerics 2-channel listening modes, 3-26 2-Line OSD parameter, 3-3 5.1-channel direct inputs, 3-29 5-channel listening modes, 3-26 7.
Index Lexicon E L EQ ADJUST parameter, 4-3 EQ PRESET parameter, 4-2 H listening modes, 3-23 5.1-channel direct inputs, 3-29 7.
Index RV-5 power AC input connector, 2-7 POWER ON SETTINGS menu, 3-2, 3-33 rear panel switch, 2-7 standby button, 2-4 preamplifier rear panel connectors, 2-6, 2-8 R REAR AMP parameter, 3-6 rear panel connectors, 2-6–2-7 overview, 2-5 remote control adjusting the touch screen contrast, C-7 advanced customizing tools, C-6 backlight time out, C-7 battery installation, 1-4 button learning, C-4 buttons overview, 2-11 cloning, C-11 command matrix, 2-12–2-16 customizing the touch screen, C-7 erasing commands, C-
Index V video ADVANCED VIDEO menu, 3-18, 3-20 CONNECTION parameter, 3-3 default video source settings, 3-21 rear panel connectors, 2-7 VIDEO IN setup parameter, 3-15 VIDEO OUT parameter, 3-16 video resolutions table, 6-10 VIDEO STATUS menu, 4-4 V-PROCESS parameter, 3-15 volume adjust Main Zone level, 2-3 adjust Zone 2 level, 2-3 knob, 2-3 MUTE LEVELS menu, 3-33 V-PROCESS parameter, 3-15 X X-COLOR SUPPRESS parameter, 3-21 Z Zone 2 input selection buttons, 2-3 INPUT SETUP menu, 3-2 mute levels paramater, 3-
LIMITED WARRANTY Harman Specialty Group offers the following warranty on this product: 4. Damage to a unit that has been altered, or on which the serial number has been defaced, modified, or removed. What is the Duration of this Warranty? This warranty will remain in effect for three (3) years from the original date of purchase. What Expenses will Harman Specialty Group Assume? Who is Covered? Harman Specialty Group will pay all labor and material expenses for covered items.
!ª(ARMANª)NTERNATIONALª#OMPANY /AK 0ARK $RIVE "EDFORD -! 4EL &AX WWW LEXICON COM #USTOMER 3ERVICE 4ELEPHONE 3ALES &AX 3ERVICE &AX 0RODUCT 3HIPMENTS -IDDLESEX "LDG "ILLERICA -! 0ART .
