User's Manual

Getting Started
9
Lexmark confidential until announced
Click Continue.
Select the network to which you want to connect
your printer.
Note: If the network to which you want to
connect your printer is the same network
to which your computer was connected,
you may want to refer to the values you
wrote down in step 7 on page 8.
Note: If your network is not listed, click Advanced
to manually select your network settings.
Click Connect.
If you do not have WEP security enabled for your
network, continue with step 15 on page 10.
If your network is secured, select the encryption
bit and enter the WEP Key on the Network
Security screen.
Click Continue.
11
12
SSID
Connect
Mode Encryption Channel
Manual Selection
Join the network
You are connected to the N5 adapter at address 00-20-00-00-0A-47
Find the network that you wish to have this adapter join from the list below and
select connect.
If your adapter is not listed
John's Infrastructure None 8
default Infrasturcture None 5
home Infrastructure Yes 9
(ed: selection is
highlighted, do
not show N5)
Setup your wireless printer adapter.
If your network is not listed.
4
Back Exit
Advanced
11
13
Enter WEP information
40/64 bit 128 bit
WEP Key
For more key information.
Network Security.
The network that you selected requires a security key.
6
Back Exit
Note: Key must be hexidecimal. Passphrases not supported
14