User's Manual

Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic inputs. 15
Copying The product is generating hard-copy output from hard-copy original documents. 13
Scanning The product is scanning hard-copy documents. 10
Ready The product is waiting for a print job. 8
Power Saver The product is in energy-saving mode. 5.2
High Off The product is plugged into a wall outlet, but the power switch is turned off. not applicable
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is turned off, and the product
is in the lowest possible power consumption mode.
not applicable
Off The product is plugged into a wall outlet, but the power switch is turned off. 0.3
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be
substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode. The
Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically
engaged after this product is not used for a specified period of time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes): 60
Off mode
If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect
the power supply cord from the wall outlet.
Total energy usage
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the
power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product
energy usage is the sum of each mode's energy usage.
End-user license agreement
Opening this package, installing the printing device software, or using the print cartridges inside, confirms your acceptance of the following
license/agreement: The patented print cartridges contained inside are licensed for a single use only and is/are designed to stop working after
delivering a fixed amount of ink. A variable amount of ink will remain in the cartridge when replacement is required. After this single use, the
license to use the print cartridge terminates, and the used cartridge must be returned only to Lexmark for remanufacturing, refilling or recycling.
If you do not accept the terms of this single use license/agreement, return this product in its original packaging to your point of
purchase. A replacement cartridge sold without these terms is available at www.lexmark.com.
Statement of Limited Warranty
Lexmark International, Inc., Lexington, KY
This limited warranty applies to the United States. For customers outside the U.S., see the country-specific warranty information that came with
your product.
This limited warranty applies to this product only if it was originally purchased for your use, and not for resale, from Lexmark or a Lexmark
remarketer, referred to in this statement as “Remarketer.”
Lexmark Confidential until announced
Notices
104