User's Manual

Table Of Contents
2 Wait for the light located above the memory card slots on the printer to come on. The light blinks to indicate the memory
card is being read or is transmitting data.
Warning: Do not touch cables, any network adapter, the memory card, or the printer in the area shown while actively
printing, reading, or writing from a memory card. A loss of data can occur. Also, do not remove a memory card while
actively printing, reading, or writing from a memory card.
When the printer recognizes that a memory card is installed, the message Memory Card Detected appears.
If the printer does not read the memory card, remove and reinsert it. For more information, see “Memory card
troubleshooting” on page 89.
Note: The printer recognizes one active memory card at a time. If you insert more than one memory card, a message
appears on the display prompting you to remove the memory card that is not in use.
Inserting a flash drive
1 Insert the flash drive into the PictBridge port on the front of the printer.
Note: An adapter may be necessary if your flash drive does not fit directly into the port.
Lexmark Confidential until announced
Working with photos
42